Search results

  1. tpenfield

    Boat info appreciated

    It probably is TBS00074B808 . . . . Not TB5. The info that I posted above comes up on the HINDecoder website.
  2. tpenfield

    Wiring Problem on Tilt trailer

    I would check the voltage you are seeing both at the '+' wires and the ground with the lights on. See what voltage you are getting with no lights on. There may be a voltage drop somewhere, if the lights are dim.
  3. tpenfield

    Boat info appreciated

    Also, 'Bay water' boats comes up on JDPower Guides https://www.jdpower.com/boats/2009/bay-water-boats
  4. tpenfield

    Boat info appreciated

    Post up the HIN number if you like for more specific info.
  5. tpenfield

    Boat info appreciated

    I found some other info . . . Tallahatchie Boats LLC was owned by Richard Wright and was located at PO Box 423 in Charleston state of MS. This Boat maker is not owned by a parent company. Tallahatchie Boats LLC started making boats as of 8/10/2007 and went out of business on 9/2/2009. So, not...
  6. tpenfield

    F-150 Transmission Issues (I think? . . . No, I thought )

    Here is a picture of the turbo charger and the wastegate lever/pivot shown at the base.
  7. tpenfield

    Boat construction question for tank removal

    Sure looks like that tank would have come out if you lifted one side first and raised it in a tilted fashion. :unsure: still got the flange piece?
  8. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    I believe that the crankshaft sensor is mission critical. As I recall . . . on of my vehicles had a bad crankshaft sensor and it would frequently not start. Had to get it towed to the local repair shop.
  9. tpenfield

    F-150 Transmission Issues (I think? . . . No, I thought )

    Yes, my truck has 207K miles. . . Just hoping to get some more out of it. I mostly use it for towing the boat, but it does get the call of duty for other stuff. I've only put about 1,500 miles on it in the past 2 years.
  10. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    As for the coolant temperature . . . when you are running the engine at idle and the engine is fully warmed, the t-stat may be fairly far open because the coolant flow is slow. An increase of the throttle will immediately cause a drop in the ECT as cooler coolant rushes in . . . as it does the...
  11. tpenfield

    F-150 Transmission Issues (I think? . . . No, I thought )

    Fingers crossed 🤞, but it is fixed. . . :) I hooked up my pancake compressor, set it to 20 (ish) psi and exercised the wastegate actuators. The right (passenger) side of the engine was fine. The wastegate moved and retracted as it should with pressure & relief. The left (driver) side, the...
  12. tpenfield

    Question(s) about replacing the foam/floor in my deep-v

    Post up some pictures if you can. Aluminum boats and foam flotation are a different animal than fiberglass boats and foam flotation. If you've had wet foam in contact with the aluminum hull, it would be best to inspect for corrosion/pits/etc.
  13. tpenfield

    F-150 Transmission Issues (I think? . . . No, I thought )

    To recap . . . I bought the truck November of 2021 and drove it from MA to CT and back to pick up a (big) trailer. I don't remember it having the flutter then. I pulled the (big) boat out of the water in November and the truck sat over the winter while I was replacing the brakes. Then in...
  14. tpenfield

    F-150 Transmission Issues (I think? . . . No, I thought )

    Yes, I just want to get rid of the flutter so the turbo runs smoothly, particularly on hills.
  15. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    Different spot that I was thinking, but glad you found it.
  16. tpenfield

    1989 25' Invader cabin crusier fiberglass stress cracks

    34 year old boat. . . normal went out the window a while ago. Stress cracks around the transom are usually signs of trouble.
  17. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    I thought the CPS was top portion of the block, just behind the recirculating pump, slightly to the starboard side.
  18. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    Also check the connectors to those 2 sensors to be sure they are tight, not corroded, etc.
  19. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    You should be able to connect to the engine and reset codes with just the ignition on and not running.
  20. tpenfield

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    I have my Diacom computer on my boat and will be there in the next few days, so will look at the recordings then. Some initial thoughts . . . Probably not going to worry about the ECT at this point, because you have some hard faults for the Crank and Cam sensors. If you clear those faults, do...
Top