Search results

  1. tpenfield

    1983 25 HP Evinrude Shifting Very Stiff

    Yes, I did that. Not sure if I was not clear on that point.
  2. tpenfield

    1983 25 HP Evinrude Shifting Very Stiff

    Greetings, Model E25ELCTD , Which I believe is 1983 (ish). Cable single lever remote controls . . . electric start. The shifting F-N-R is very stiff and takes an excessive amount of effort on the control lever to get the motor to shift in and out of gear. I've taken a quick look at the parts...
  3. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Quick update . . . The Whaler is launched. . . . . The shifting is very stiff, which has been a problem all along. I thought the new controls would help, but they don't. Without the cables attached to the shift and throttle levers on the motor, the control cables move quite easily. I tried...
  4. tpenfield

    Aluminum vs. plastic fuel tanks

    IMO, larger tanks are better off as aluminum, because there can be more internal structure to the tank for strength and baffles. A 55 gallon tank might be on the edge as to when you want to go aluminum.
  5. tpenfield

    Parts help

    They are referred to as 'wear pads' on the parts list. Usually the first thing that breaks off the outdrive. I never replace them. :)
  6. tpenfield

    1986 seaswirl nightmare

    This could be a tough road to travel, considering the OMC I/O, unless you are mechanically oriented. It sounds like you are going to need to go through many aspects of the engine and outdrive to make sure it is all working.
  7. tpenfield

    Trailer driving lights do not work, what I've done so far...

    I usually forget, but it is a good idea.
  8. tpenfield

    Boat small ding repair.

    Gelcoat patch kit. You will have to try to color match the red as best you can. https://www.iboats.com/shop/paint-and-maintenance/fiberglass-and-epoxy-boat-repair/evercoat-match-n-patch-gelcoat-repair-kit.html
  9. tpenfield

    1980 Mercury 9.8hp outboard

    Probably some impeller bits went up into the cooling passages . also if it had overheated, there is a plastic washer at the top of the copper intake tube that can melt. and restrict the water flow. Not sure when Merc changed to the phenolic material.
  10. tpenfield

    If you have a roller trailer used in salt water....check this....

    I don't care what Boston Whaler recommends . . . I'm keeping the roller trailer . . . maybe I'll get bunk rollers as a compromise :ROFLMAO:
  11. tpenfield

    If you have a roller trailer used in salt water....check this....

    I'm re-building my small trailer used for the Boston Whaler. It is an older trailer (Yacht Club brand). The frame is galvanized, but many of the component parts are regular steel. Leaf springs and associated hardware have a certain life span in salt water. The roller mounts have some...
  12. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Yup . . . It was all polyurethane about 5 years ago. The sun had its way. I also discovered that the bilge pump is not working. So, I have a new one to install.
  13. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Custom add done last year. :D
  14. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Yup, maybe it will get used more as the improvements are made. I got the new axle/springs/wheels installed. . . :D
  15. tpenfield

    Buying used items. What's the worst thing a seller has ever tried to do to you.

    Wouldn’t the krazy glued zipper be a red flag?
  16. tpenfield

    Removing trim senders screws

    I would try some heat on the gimbal ring as close to the screws as you can get, followed by some freeze spray right on the screws. Also, you could see if you can get some Barnacle Buster to soak into the screw threads for a day or so. The screws are small, and will snap off easily, so you...
  17. tpenfield

    My boat is being a boat . . .

    Speaking of beer . . . it was a nice day with calm seas on the water yesterday at a local hang-out spot. However, our day was cut short when we ran out of beer and could not call for an air-drop. We have now assigned an assistant beverage supply officer to make sure this incident is not...
  18. tpenfield

    Close on the formula

    This thread needs pictures
  19. tpenfield

    My boat is being a boat . . .

    Cheap ownership went out when I got rid of the sailboat ⛵️. It is more of a fun thing to try to control costs 😀
  20. tpenfield

    My boat is being a boat . . .

    Quick update . . . The Admiral gets discounts on fuel with a loyalty card at the grocery store (Stop & Shop), and she sure buys a lot of groceries. Well the 'points' have accumulated to $1.30 off per gallon for 20 gallons. So . . . we'll be getting 20 gallons in jugs today, which will bring...
Top