Search results

  1. dingbat

    Tell tale getting clogged '96 200hp Oceanrunner

    Your simply reversing the flow of water through the power head. Instead of coming in through the water pump, it's going out the water pump
  2. dingbat

    Bilge pump wiring

    Bilge pump circuit should be wired directly to the battery to prevent this situation Sounds like bad pump switch Your shorting the manual and override circuits connecting them together. You must have a 3 way switch for it to work. It doesn't matter, Ground is Ground.
  3. dingbat

    Intermittent electrical none start no Accessories power, power returns by its self

    Intermittent power problems are easy to track as long as your systematic and don't make any assumption with your troubleshooting. You always start at the source (battery) with power problems. If you have power there, move to the next device, ie main circuit breaker. Circuit breakers are...
  4. dingbat

    Tell tale getting clogged '96 200hp Oceanrunner

    Two power heads and 20+ years of ownership. Never had muffs on my motor The system is designed to be (back) flushed using the flush port. Run it on the flush port to blow the stuff out Should have 30 psi in the water on a fresh water pump rebuild
  5. dingbat

    Anyone familiar with Hynautics Hydraulic Steering?

    Yep, the end caps screw off.
  6. dingbat

    Tell tale getting clogged '96 200hp Oceanrunner

    You running on muffs? Have you tried using the flush port to see if that gets rid of the problem?
  7. dingbat

    Anyone familiar with Hynautics Hydraulic Steering?

    It appears to be a "sealed" (can't rebuild) cylinder although replacement cost is a bit steep for a throw away cylinder. Have you tried twisting the end caps off the ends of the tube? https://www.ezyglide.com/replacement-parts
  8. dingbat

    Bilge pump wiring

    You need a 3 way switch to have manual (override) and auto mode on a single switch Can either wire power to pump and switch ground for control or... wire ground to switch and switch power for control
  9. dingbat

    When you're 20 miles from home and see this bearing down on you...

    Imagine seeing that coming towards you trolling a 18 rod spread on planer boards....lol The small popcorn storms are not an issue unless accompanied with by lightening. Had carbon fiber (fishing) rods rattle in the rack more than once. It's the frontal boundaries passing through in late fall...
  10. dingbat

    Fuel problem survives engine replacement

    Check to see if someone removed the anti-siphon valve from the fuel tank. If you have the slightest leak whatsoever in the fuel delivery system the fuel will siphon back into the fuel tank over time
  11. dingbat

    I bought a 2004 used power drive with autopilot and it will not lock a heading going south. How can I fix this?

    Mod EDIT: Link to copyright manual deleted
  12. dingbat

    Yamaha Command Link Square Speed Gauge Not Registering Fuel

    You posted a mechanical only sender I've seen senders go both ways. How does the wiring diagram tell you to hook them up?
  13. dingbat

    Blue sea circuit breaker help

    Electronics don't die of old age, they die from abuse. Something as simple as turning the battery switch off with the motor running or hooking the battery cable up backwards can blow an alternator
  14. dingbat

    Blue sea circuit breaker help

    Then you have a bad altenator
  15. dingbat

    Blue sea circuit breaker help

    Not necessarily. Depends on the charging system What motor are we talking about. Yes.....bad for an automotive alternator. Maybe......for a stator drive outboard
  16. dingbat

    DepthTrax 2BX troubles

    No, it does not
  17. dingbat

    Blue sea circuit breaker help

    Depends on how your switch is setup. Typically battery 1 is connected to the motor for start and charging purposes. Battery 2 is typically wired to the power the "house" loads. If you took the battery lead (big red wire) from battery 1 and put it on battery 2 and nothing worked, battery 2...
  18. dingbat

    Older boat/ motor and New Electronics

    I fish a pretty big pond. Anywhere from 1/2 to 2.5 hour run to the fishing grounds. It's the 6 to 8 hours of trolling that gets me Mine is pretty good. Rare to not start on the second crank with temps above freezing. Once warm, a quick turn of the key and I'm off. Here is what I use with two...
  19. dingbat

    live well pumps

    Normal operation if I understand you correctly. You need to have a "scoop" type intake if you want the pump to work while moving
  20. dingbat

    Older boat/ motor and New Electronics

    I run 9" chart plotter, 9" fish finder, VHF, CD, NMEA 2k network and wash down. A grp. 27 battery couldn't keep up a full 8 hour day with 30 amp output and an hour of run time Keep in mind that you only get 10 amps for every 1 hour of run time above 1500 rpm Multiply your run time (above 1500)...
Top