Search results

  1. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    For my Kingfisher, I made a single chamfer cut using my jig saw and a circular saw for the straight cuts. I plan to do the same thing with my Chieftain. :)
  2. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Should I re-buck or replace leaking rivets near the dent? We're making progress out here again. 🙂
  3. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Ah. So I should treat the dent as cosmetic and not structural? My concern was that I'd be 15 miles out in the Gulf and have a catastrophic failure while pounding waves running to shore from a storm. :oops:😬
  4. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    And while I was in the garage, I contacted a guy who might be able to help me with this dent in the hull. That's a worrisome item right there. 😬
  5. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    I've lost a week of progress and I was also gone most of yesterday and busy once I got home. Felt like I'd lost the great mojo which had been really rolling at the beginning of the month. 😒 But this morning I got out to the garage and got about 90 minutes of work done before it started...
  6. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Yes, I had them installed last month.
  7. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    It got down to 85 degrees, so I went out to the garage and did a little work. Just came in. Can anybody guess what I'm up to now? :unsure: :D
  8. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Uhoh. We already have 3 out. 😬 I really like having the Chief in the garage; easier to work on. Chief in the garage and the Kingfisher connected up to go fishing the next morning. No, I don't tow with that tarp on there.
  9. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Whether or not to remove all of the ribs is a very good question. I absolutely don't want to do that if it really isn't necessary. It adds expense, significant time delays and serious stress. I pulled the #1 rib (closest to the stern) and it had a pinhole and some corrosion under the center...
  10. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Any help? I've been busy with other stuff over the last several days and haven't done any work lately. We only have 3 ribs removed thus far and I'd really like get some feedback on whether or not I can safely remove all the ribs simultaneously. :) And before I order 1,000 rivets, I'd like...
  11. BWR1953

    1987 Starcraft islander 190v?

    Congrats on the splash; looks great! :cool: (y)
  12. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    QUESTION: should I repair & replace 3 or 4 ribs at a time? Or just go ahead and pull them all? Removing all of them simultaneously seems like it could compromise the structural integrity of the hull. Especially while we're moving around inside. :unsure: I'm thinking that I should go...
  13. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Here's how we did it with the Kingfisher.
  14. BWR1953

    Electric Cars or Trucks

    They probably will be in 2075. :ROFLMAO:
  15. BWR1953

    Electric Cars or Trucks

    Indeed.
  16. BWR1953

    MERCURY CONTROL BOXES

  17. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    More corrosion investigation and work today. Really quite nasty. Yuck. :confused: We got the first rib out. Rib corrosion isn't as bad. This can be cleaned up and reused. I cut the BCX plywood (that I bought last month) to the correct width for the deck and will be using the "scrap"...
  18. BWR1953

    Is it needed?

    HDPE cutting board would work.
  19. BWR1953

    Electric Cars or Trucks

    VW may bring back the Scout as an EV. https://www.motortrend.com/news/volkswagen-international-scout-ev-pickup-truck-suv/
  20. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    This morning I bought an air hammer and this evening I ordered clecos, bucking bar, a large tube of 3M 5200 and a set of rivet setting bits. I anticipate a lot of work to clear up that corrosion. 😲 So, it's time to arm up! 😎 And I have to order rivets as well. That'll be after I get a...
Top