Search results

  1. Moserkr

    1979 Starcraft 16’ SS Refresh

    Had the boat out on one of the largest reservoirs in the state last weekend, one that was warmer and lower in elevation. Our local lakes are full but the airs still a little cold for family time on high mountain lakes. In the meantime Ive been doing some work. My front hitch post was meant...
  2. Moserkr

    1978 SS 16 restoration

    Last time we were out was the first time the boat got no attention. Probably because we were at a big lake with people who had $200,000 wake surfing boats lol. Comes with the territory of restoring these old gems! If you want to eke some more performance out of your motor, a stainless prop...
  3. Moserkr

    1976 22' SUS O/B "Hydration Break"

    Looks great! I like the idea of coat-it on the transom. Should absolutely prevent corrosion and add some integrity. That stuff is so tough. You should have a leak free boat when you’re done.
  4. Moserkr

    1972 18 FT Starcraft SS

    Entire bottom of hull below the waterline, which is unnecessary actually, was coated on mine. But my hull was in good shape, no pinholes or corrosion, just had a bunch of rivets that popped due to (PO2) hitting a log. PO coated it all. Then I coated all the rivets on the inside below waterline.
  5. Moserkr

    1972 18 FT Starcraft SS

    Awesome! I will say Im not disappointed with the coat-it on mine. It makes it ugly to paint unless you sand it down. Same with removal - paint remover didnt even phase it. Sanding it off is the only way to remove it. The PO of my boat coated the whole underside of the hull, which coat-it...
  6. Moserkr

    1972 18 FT Starcraft SS

    Thats a lot of gluvit! Are you coating the whole bottom? Think I only used 2 pints of coat-it, same thing, and still had some leftover just hitting each rivet with a splotch, plus seams. Just keep the can covered with some plastic wrap or it will start to thicken on you as you work.
  7. Moserkr

    1982 MR 180

    Boat is looking great Joe. And some fine redneckery too!
  8. Moserkr

    84 SS 160

    Great looking boat! Welcome to the forum, looking forward to you working on her.
  9. Moserkr

    1972 18 FT Starcraft SS

    We should get you moved over to the Starcraft boat section. Bunch of tinheads there to help you out who are very familiar with these boats. Overall she is in great shape! The strake being the worst, does the hole go all the way through the hull?? Either way its patchable. The strakes are...
  10. Moserkr

    1969 Super Sport 16 Single Console Conversion

    Nice work! It does look like an old fishing machine, with lots of years left to go. A previous owner (PO) definitely did some custom hack work to your boat but thats alright. The road sign is actually good aluminum for boat building, worth saving. When you replace the floors down the line...
  11. Moserkr

    1979 Starcraft 16’ SS Refresh

    Thanks guys! Admiral definitely wanted to be comfortable. Since I have a front casting deck the bow seats just sit on the hydroturf floor. One thing I didnt like about starcrafts original setup with the aisle was the skinny bow seats and smaller backrest. So I made mine console width, left a...
  12. Moserkr

    1979 Starcraft 16’ SS Refresh

    Took the family out on the lake today, my second mate’s first time on the water. She had a great time! Over the last week Ive been doing some work. Front bow hand rails, new front nav light (old one failed), cleaned up wiring, and finally finished the bow seating as Id always wanted it...
  13. Moserkr

    1975 SS160 weight?

    To answer your questions about your weight with trailer…. Just guessing here. Trailer - guess weight since I dont know how big yours is. Hull - 450 Floor - 100 Fuel - 50-100 Seats, steering wheel, etc - 50 Batteries - 100 Motor - 250 Trolling motor - 75 If your trailer is under 500 lbs you...
  14. Moserkr

    1975 SS160 weight?

    I was just running numbers for my new prop and I believe what you’re figuring is correct. Bare hull though should only be around 450lbs I think. But capacity is 900, so total with all gear, motor, people, everything - 1,500 lbs. Thats how the illegible plate reads at least.
  15. Moserkr

    1969 Super Sport 16 Single Console Conversion

    No problem. These boats are not hard to work on and worth the trouble. Once you have them set up, they will last you many years! Mine is 44 years old and is like new now. I have a casting deck like yours but use mine as a fish/ski with the fam. Best part is they are easy to customize...
  16. Moserkr

    Post a pic of your starcraft!

    @1978stabler You should start a rebuild thread in the starcraft forum! Good looking old boat.
  17. Moserkr

    1969 Super Sport 16 Single Console Conversion

    Welcome Tom! Glad the boat is in relatively good condition. Replacing the floor and foam would be great first steps. If you have the tools and material ahead of time, doing that part of the project could go fairly quickly. Not having to remove the motor or do any paint work saves a ton of...
  18. Moserkr

    68 Offshore restoration

    Looks great Sharpie!
  19. Moserkr

    1984 starcraft islander

    Yea I couldnt tell from the pics if the boat had those chine tabs from the factory. As long as its closed cell foam, it shouldnt matter if you do pour in or sheets. Doubt the original foam was closed cell.
  20. Moserkr

    1968 StarCraft Holiday restoration

    My instincts say new hull, new boat, new thread. Hopefully the differences in the new one are positives over the last hull. Too bad they arent exact though.
Top