Search results

  1. C

    Brandnew retro fitted water shutters making tons of noise

    Here is a video of the noise
  2. C

    Brandnew retro fitted water shutters making tons of noise

    So after installing the new style flapper. There is tons of noise. The old style that were in there just has rod going through the flapper. Any help would be appreciated.
  3. C

    4.3 mercruiser how to winterize with outdrive on

    So I'm having the outdrive rebuilt so there is not one on it. The things I have done so far. I have drained both sides of the block and drained both exhausts. I have taken every hose off to drain.. should I worry about putting in antifreeze?
  4. C

    Mercruiser 4.3 Knocking noise when idle

    What was ur problem
  5. C

    1987 alpha one 175 noise coming from bellhousing

    I have the drive off and it still makes the noise
  6. C

    engine coupler noise

    Are the rubber on the coupler?
  7. C

    1987 alpha one 175 noise coming from bellhousing

    I Pulled the motor checked the flywheel torqued everything. Can't seem to find the problem.
  8. C

    Alpha one not fully engaging reverse

    It's all better now! Thanks but have another problem motor is brandnew and when I go to shut motor off I it makes a knock noise or ping after turning off motor
  9. C

    1987 alpha one 175 noise coming from bellhousing

    Soo when I turn the motor off it makes a knock/ping.
  10. C

    1987 alpha one 175 noise coming from bellhousing

    I took out drive off and it still makes the noise
  11. C

    1987 alpha one 175 noise coming from bellhousing

    It's a new to me boat...
  12. C

    1987 alpha one 175 noise coming from bellhousing

    It dawned on me that when I took the motor out there where wood spacers under the front motor mounts that I forgot to put back in...could out of alignment cause this?
  13. C

    1987 alpha one 175 noise coming from bellhousing

    It's not the motor it is coming from the bell housing area also I just bought the motor was not from a dealer
  14. C

    1987 alpha one 175 noise coming from bellhousing

    It is a brand new 4.3 vortec.
  15. C

    1987 alpha one 175 noise coming from bellhousing

    I have a video of it it's comes and goes. When I accelerate it get quieter. Mainly does it at idle.
  16. C

    Alpha one not fully engaging reverse

  17. C

    Alpha one not fully engaging reverse

    So I installed a new shift cable it is alot better but I have to manually push the shift rod for full reverse to engage but I did notice when screwing in the shift cable it would not seat all the way down...
  18. C

    Alpha one not fully engaging reverse

    I mean the old cable is the culprit?
  19. C

    Alpha one not fully engaging reverse

    I seen that last night so a new shift cable is the culprit?
  20. C

    Alpha one not fully engaging reverse

    I got a 1987 marlin open bow the boat shifts in forward and neutral just fine but when I shift to reverse I have to pull really hard on shift cable to engage reverse. I have that cable disconnected.. could it just be worn out. Any help greatly appreciated.
Top