Search results

  1. J

    Volvo Penta Ford help

    bought a boat with a 8 cylinder ford in it , not sure the year or horse power , no tags on motor that i can find , has a volvo penta stern drive , nothing on it either the boat is a 1979 thats all i know HELP
  2. J

    1977 6 hp Johnson

    copper tube is in place , water is above impeller postion
  3. J

    1977 6 hp Johnson

    put in new impeller , have water coming out of upper exhaust , but not water coming out pee hole , pulled thermostat and no water there either , need help JP
  4. J

    18hp evinrude bad cough

    pretty sure compression was 120 on both cylinders
  5. J

    18hp evinrude bad cough

    hi guys , have a 1966 18 hp evinrude , seems not to run to bad butt has a bad cough at low speed , but new carb kit in it , checked plugs when got home , top plug was very black , bottom was clean , any ideas
  6. J

    1977 6 hp johnson waterpump

    what is PW and vermitherm
  7. J

    1977 6 hp johnson waterpump

    yes , key is in place , will try it again
  8. J

    1977 6 hp johnson waterpump

    no , copper tube stayed in place
  9. J

    1977 6 hp johnson waterpump

    hi guys , need help , 77 6 hp johnson , fired it up and no water coming out pea hole , replace waterpump with new kit , put back together still no water, took apart to test it , put in bucket water turn shaft with drill , water pump worked , put back together no water , pulled thermostate , no...
  10. J

    Need to ID motor

    the screw is up where the cap is on rh side , the cap to remove the unit , you have to lift unit all the way up , then look up in there, not by ball gear
  11. J

    Need to ID motor

    it looks like there is a drain/fill screw on right side but up and under where unit swivels from, screw has been messed with before , and will be a ***** to get at
  12. J

    Need to ID motor

    do i change oil in the gearbox that goes from engine to out drive and if so where
  13. J

    Need to ID motor

    did the bottom end , then the next one up , it has drain screw on right side and screw up top with a little dip stick , is there another to drain as i see a screw above the dip stick screw , look at pics
  14. J

    Need to ID motor

    where do i drain oil in the upper gear case
  15. J

    Need to ID motor

    seems to work fine , but does have noisy tappets, need to set them , not sure if there hydrolic or mechanical , is there anyone i can contact out there to find out the year and hp of this motor
  16. J

    Need to ID motor

    any idea what manual to get for this motor and outdrive
  17. J

    Need to ID motor

    Thats what owner ships says , 1979 , no hull number , there is a plate by steering wheel , says Model 21621 , sn : 021084 , i assume thats for the boat , punched them in and found nothing.
  18. J

    Need to ID motor

  19. J

    Need to ID motor

    there was a tag on the block , but is gone only the rivets left
  20. J

    Need to ID motor

    boat is a 1979 cruiser inc Bonanza i think, number on block is 3970020 , is 307 made between 69 and 73
Top