Search results

  1. jerryjerry05

    Trim motor replacement.2002/125 Merc.

    How do you change the trim motor on a 2002/125 Merc? OT511345 It's reallllly rusting BAD.My friend wants to change it. And before I start, I want to know how to change it. Any U-tube videos? Thanks,Jerry
  2. jerryjerry05

    1987 force 50 hp- no spark in both plugs.... new to this motor and need help

    Re: 1987 force 50 hp- no spark in both plugs.... new to this motor and need help Get a spark tester.One that measures spark strength. Weak spark could be a loose connection,loose ground,wire under the flywheel rubbed through and touching? Shorted stator? Go to outboard ignition . com or...
  3. jerryjerry05

    Force 35 Hp Overheating

    Re: Force 35 Hp Overheating Your motor needs a special kind of muffs. The regular ones don't seal as good. They might work but might not. See the pics,this is what you should get/use.
  4. jerryjerry05

    Chrysler ignition switch wiring

    Re: Chrysler ignition switch wiring Not sure this will help.
  5. jerryjerry05

    85hp force cannot get flywheel off!!!

    Re: 85hp force cannot get flywheel off!!! I use black silicone.
  6. jerryjerry05

    My first boat and motor - 1993 Force 120 No spark from any spark plug

    Re: My first boat and motor - 1993 Force 120 No spark from any spark plug Try this,It might help?
  7. jerryjerry05

    Tools for Static timing.

    A timing light,a jumper or jump box. And someway to ground the leads. I'll get the directions and post them soon.
  8. jerryjerry05

    Trying to get rich off the unsuspecting.

    Watch what you see on the net. Defective.You'd have to fix it as soon as you get it. F660541 Force Outboard 85 125 Hp Power Trim & Tilt Pump Unit #(130864423829)
  9. jerryjerry05

    Pop...Goes The Flywheel!

    Re: Pop...Goes The Flywheel! You got lucky???? Some just "pop" right off some don't.
  10. jerryjerry05

    89 Force 50HP prop tangled w/ earmuffs

    Re: 89 Force 50HP prop tangled w/ earmuffs ANY!!!! nicks/cuts or abrasions on ANY splines or grooves will stop/slow the movement of the clutch dog. A small file,or even emory cloth smooth out the nicks. The clutch dog,it's gonna have some wear from normal use. If you have a shop or acces to...
  11. jerryjerry05

    Help wiring ignition switch-1995 Force 120 HP

    Re: Help wiring ignition switch-1995 Force 120 HP Not sure,maybe this can help?
  12. jerryjerry05

    1986 Force 85 HP Outboard - Will not start no spark

    Re: 1986 Force 85 HP Outboard - Will not start no spark I believe there is a link to an impeller replacement at the top of the Force Forum. That pic you posted isin't your motor.It's close but not yours. To make sure you get the right impeller get the right parts diagram. boats . net has the...
  13. jerryjerry05

    First time boat owner, motor has a few issues, Please Help!

    Re: First time boat owner, motor has a few issues, Please Help! No way to modify the prop into a test wheel. The test wheel is heavier and you'd never get the right results. Static timing is the closest your gonna get. I made a 3 wire, ground wire setup.I used #10 or #8 wire.See pic. The spark...
  14. jerryjerry05

    Engine de-carb.

    Hi all,I'm rebuilding a Force and working on cleaning the pistons. I thought I'd test the Seafoam or Powertune by Merc. or Engine Tuner by OMC for carbon removal. The last 2 are the same product just a different name. I took the rings off and put some liquid from both Seafoam and Engine Tuner in...
  15. jerryjerry05

    1981 280 prop shaft seal

    Re: 1981 280 prop shaft seal A tool like this will help. It can be made of thick plywood or stock steel.
  16. jerryjerry05

    Force 1989 150HP Slow cranking problem. Please help

    Re: Force 1989 150HP Slow cranking problem. Please help 1 of 2 problems? You need to do a comp test and rebuild /clean the starter? These pics are from a working,yet weak starter. Take yours apart and see?? The comp test,remove all the plugs?Jump the solenoid at the motor. Profile? Location...
  17. jerryjerry05

    Is it possible for water hose pressure using ear muffs to be too high?

    Re: Is it possible for water hose pressure using ear muffs to be too high? With your 50 Force you need to worry about the right muffs. Your motor can overheat with standard muffs. You need the ones in the pics.
  18. jerryjerry05

    where does the water come in?

    Re: where does the water come in? Since your NEW!!! First pic is the NO touch.Second is the oil drin. There is a screw on the side of the drive/front.DON"T remove!!! That's part of the linkage and you won't be able to shift if you remove. Also pics help. Profile,Location? You might be close...
  19. jerryjerry05

    85HP Force (Possibly 1989 model) Believe I got a wiring a problem.

    Re: 85HP Force (Possibly 1989 model) Believe I got a wiring a problem. Pics of a thingy I made to hold the brushes to re-assemble. The starter,the brushes,they should pop right out of the holder. The one's suck in there,the screws are dirty/rusty. The corrosion will stop it from working right...
  20. jerryjerry05

    85HP Force (Possibly 1989 model) Believe I got a wiring a problem.

    Re: 85HP Force (Possibly 1989 model) Believe I got a wiring a problem. Profile?? Location?? You might be close to someone who can help?? First,do a compression test. That OK??? Then start with the basics. Starter not turning? take it apart and check/clean/rebuild. Check the cables,connections...
Top