Search results

  1. flashback

    Front wheel bearings and hubs

    Yep that's what I have and the reason I was looking for an afoerable brand that will last for a few more years..this old truck has been good to me but I don't expect too much more from it.
  2. flashback

    Front wheel bearings and hubs

    That 2500 must be a different setup my 1500 appears to be a single unit and sealed. In the olden days you could get roller bearings like on a trailer and races if needed.
  3. flashback

    Front wheel bearings and hubs

    Ok, I can do that, where should I send the beers..? Thanks.
  4. flashback

    Front wheel bearings and hubs

    I have a 2001 GMC Sierra RWD and the front bearings have been hollering for a few years and need replacement. Doesn't look difficult but deciding what to buy is.. what are your thoughts on the TRQ brand. This old truck has 200,000 miles on it and I can get the said brand almost anywhere..
  5. flashback

    Inherited a custom made wooden replica 1950's runabout WITHOUT an engine

    When it's all said and done you have a homemade replica with no motor or tranny that needs work. I think you'd be fortunate to get 5,000
  6. flashback

    Inherited a custom made wooden replica 1950's runabout WITHOUT an engine

    Your FIL was a very talented man that's a nice looking boat.
  7. flashback

    Old archived posts

    This thread caused at least one person to refresh their memory so you guys done good..
  8. flashback

    flywheel replacement

    I guess not, my bad, I thought you had outdrives..but I think It would make the job easier in any case.
  9. flashback

    flywheel replacement

    I believe you will need to get it out of the water and pull the drive first..
  10. flashback

    Old archived posts

    I found it very entertaining kinda like a novel. but I can understand the need to delete it in case someone takes it seriously...
  11. flashback

    gas in oil

    Well then I would suggest that a carb float may be sticking which could account for the smoking and fuel on the water..
  12. flashback

    gas in oil

    Not familiar with your engine but fuel injectors can leak..
  13. flashback

    Installing New OEM Egg Crate Foam for Engine Hatch?

    I would have torn the foam out long ago, there are some advantages in being able to hear the beast...
  14. flashback

    Non-Skid Gelcoat Wearing Off?

    Try some soft scrub.
  15. flashback

    '63 Steury 14 1/2 ft

    Sweet lookin
  16. flashback

    Hydroplane fin

    He's referring to a fin that is installed on the trailing end of the port sponson to hold the boat in turns. I suppose you could either add one to starboard or eliminate it altogether, I don't suspect it will have much effect on a small low power boat. The boat I built has a small fin on either...
  17. flashback

    Hose popped off - Alpha 1 Gen 2

    If you leave as is I would take the clamp off.
  18. flashback

    is a 60hp outboard too small for this boat

    It is, I saw it in popular mechanics and pop said he would help build it LOL. we got the plans and he did the cutting and I got to do the glue and screw, along with the sanding and painting.. motor lasted a couple of summers, I blew it up and the boat has been in the shed ever since. Probably...
  19. flashback

    Can Rollers Damage the hull?

    Any way you cut it, bunks distribute the load over a much larger area and both need to be set properly.. roller or bunk.
  20. flashback

    is a 60hp outboard too small for this boat

    I have a hydroplane I built with dads help in 1961 called a scat cat he found a 18 HP merc that was less than 100 lbs. Still have the boat,a few years ago I thought about finding a motor but nothing is available these days that comes close..
Top