Search results

  1. Sea Rider

    High Altitude Boating

    If in the need to use a inflatable at a high altitude lake 4,000/5,000 meters above sea level, where the engines losses about 12% of it's horsepower each 1,000 meters, would I need to have at hand a lower or higher size pitch compared to the factory prop delivered to compensate this high...
  2. Sea Rider

    Mariner 5 HP Internal Tank Leakage Warning

    Some gas leakages inside cowling has been reported on Mariner 5 HP, The problem: during summer's high heat, pressure builds up on internal tank that leaks with gas through the hose that connects tank to tank selector control. The tank tube has a middle neck which is of inferior diameter as the...
  3. Sea Rider

    Tohatsu 18 Leg Removal

    Hi TG If wanted to remove the lower leg assy to change impeller, what spring pin would you recommend to be removed form joint link 1 or 2 ? Is there a way to block upper or lower rods so not to lateral move once the picked pin is being removed with a pin extractor ? Happy Boating
  4. Sea Rider

    Tohatsu 18 HP 2 St. Torq Adjustments

    Was wondering if any of you guys out there, could provide me with this info: Need the adjusting torquimeter values of the head cylinder to re adjust head gasket values, need the data expressed in Newton/Meters, also the torque adjustment sequence of all head bolts. Thanks in advance. Happy Boating
  5. Sea Rider

    Tohatsu 50 HP, 2 Strokes Issue

    Hello All New to this forums, but not new to boats and engines. Just a technical issue, must all 3 carbs from this 2007 model year, have all 3 mixture screws adjusted at the same (in or out) tuns. Are 1 1/2 to 2 1/2 turns correct mixture factory adjustments ? Does this models needs in order to...
View older results
Top