Search results

  1. harringtondav

    Looking for a bigger boat....

    Classic, and applicable to many endeavors.
  2. harringtondav

    Empty trailor weight

    ..so it's easy for me to spend someone else's money. A marina could lift your boat off the trailer, then you could do the scale thing. That is what I'd do in frozen water Iowa. ...maybe you could launch and tie up your pontoon, and head for the scales....if you are south of the Mason-Dixon line.
  3. harringtondav

    Home Renovations - Weather Permitting

    I've been picking away at finishing the walk out basement at our river house over the last 6-7 yrs. Mostly prep work. I beamed up the 20' span that was supported by a block wall before the first owner added 16' on the length of the house, and removed the block wall. Sump pump, new gutters with...
  4. harringtondav

    Empty trailor weight

    ..not sure of Florida's requirements. The simple way is to go to a scale with the empty trailer and tow vehicle and weigh both. Unhitch the trailer and weigh again. The difference in weight will be the trailer's weight. Most scales have certified weight print outs. ...maybe good enough for FL.
  5. harringtondav

    Looking for a bigger boat....

    Repeating much of the above here. Max towing capacity is the weight of everything coupled to the hitch. Generally this is based on a combination of the vehicle's stability, traction and power. GVWR includes the weight of everything and everyone in the vehicle, plus the tongue weight load. The...
  6. harringtondav

    Scotch Guard on Sunbrella

    Good to know, and if correct blows my theory. I'll check 303's MSD's on their various products. MSD documents don't lie. I've saved wasted dollars before by digging this deep. ...maybe the next time I purchase 303.
  7. harringtondav

    Scotch Guard on Sunbrella

    My guess is the regular stuff is for patio furniture and less critical fabrics. I'm also guessing that the main waterproofing component in 303 and other waterproofers (wood, stone, etc) is silicone. Marine grade 303 likely has a larger amount of this. I suppose you could multi-coat with the...
  8. harringtondav

    Scotch Guard on Sunbrella

    Yes. great stuff. Per above it is pricey. ....$65-$72/gal. I load it into a hand spray bottle and two-coat the fabric. I double coated my old boat's mooring cover and still had about a pint left over. Good for two yrs. ....hope the new owner appreciates it. When I get my new boat in June the...
  9. harringtondav

    Scotch Guard on Sunbrella

    Scotch Guard is a good stain repellent, but won't remove stains. I use 303 Marine Fabric Guard. They claim to be Sunbrella approved. ...I don't know about that, but I swear by the stuff. After application I've filled my mooring cover with a puddle of water. It held like a swimming pool liner...
  10. harringtondav

    Brain fart while removing Alpha drive

    I've done the same once. No damage to the shift linkage in my case. But that was the first and last time I made the error. Some of the shift linkage is being stressed when you force the foot. So I'd try to remember to shift to FWD from now on.
  11. harringtondav

    Can I replace an alpha 1 gen I with an alpha 1 gen II?

    This is over my head for solid advice. @achris and other forum gray beards can give you the scoop. But Alpha I to Alpha II conversions are possible, with some effort.
  12. harringtondav

    First Engine Rebuild you did

    My first and only full rebuild was my Kawasaki H1F 500 triple two stroke. I did a full rebuild on a Deere 6.9 L diesel when I was working at their Dallas TX branch service and training center. ....that really doesn't count though. That engine should of had a zipper on it. It was rebuild +- 10...
  13. harringtondav

    Driveshaft Gear Rotational Torque

    I agree with todhunter and Rick. Wedging a separator between the spacer and either bearing, just a touch, will relieve the press fit load on the two bearings. Then try again. Just be careful to not raise a burr on the aluminum spacer. It could compress under thrust load and leave you loose...
  14. harringtondav

    Nosedive!

    The ladder probably caused drag which would have pulled the bow down some. But with too many people sitting forward it probably tipped the scale. A few weeks ago I saw a pontoon start to submarine in calm water at the starboard corner. Simple weight distribution was the problem. This was was a...
  15. harringtondav

    Driveshaft Gear Rotational Torque

    When you replace the gear yoke seal the yoke shaft slides out of the assembled gear and bearings and spacer. These remain pressed together at whatever preload existed before disassembly. The tricky part is getting the rolling torque correct on reassembly. The nylock nut holding it all together...
  16. harringtondav

    Air Bags to lift docks and boat lifts?

    I've spoken by phone several times with Donnie Manns, the owner...or owner's son. Great guy. Good products. I was a little concerned about how the bags would fare eight - fourteen feet below the Mississippi. But when I received the bags I felt better. They are made of tough stuff. And their...
  17. harringtondav

    Air Bags to lift docks and boat lifts?

    http://www.boatlifthelper.com/ I think I was the OP on the topic a while back. I used two 3' bags to get my marine rail lift in and out this season. I works great.
  18. harringtondav

    Best clearcoat safe tree sap remover?

    I fuss over our vehicle's finishes like I fuss over our boat's gelcoat. ...Clear coat is simple: Keep it clean, give it a coat of Liquid Glass LG100 once or twice a year. But we have a large clump river birch over our driveway. In the spring it mists down sap. I try to keep the vehicles in the...
  19. harringtondav

    Laptop looses wireless connection when on battery

    Dell Inspiron 15 3565 Intel 3165 wireless card driver Nov 2018 new My daughter's laptop. Her complaint is wireless internet connection drops when she is on battery only. All is well when she is on the charger. Battery seems fine based on the charge icon. I've tweaked power settings as best as...
  20. harringtondav

    Alpha 1 Gen 2 trim issue

    Low lube in the reservoir, or more likely milky oil, will verify this. Oil leaks past the rod seal when trimming in keeping the drive up. When pushed in water can be sucked back in past the seals. This water is then pushed back into the reservoir when you trim up. This should show itself with...
Top