Search results

  1. tg3690

    electric outboard, 350 Hp

    WOW. No pricing yet, still in development stage....
  2. tg3690

    Intermittent "cough" during startup.

    I googled it.....Lower Explosive Limit.....and Upper Explosive Limit......one would think gas would burn at all times, but not so. Interesting info. My engine "coughs" sometimes too, but only on the first start...after that, no problem.
  3. tg3690

    Trailer needs attention on used flat bottom.

    If you use the plastic bunk slicks that run the entire length of the board then no need for carpet. Have heard that some areas do not allow carpeted bunks in order to reduce the spread of invasive species, although not here in Texas. And without the carpet, your bunk boards dry quicker without...
  4. tg3690

    Starter brushes

    Well it looks like my starter disassembly and cleaning, along with installing a new OEM NOS starter solenoid fixed the issue I was having. Before, when turning the key to start, sometimes nothing would happen, would have to turn the key off and on several times to activate the starter. This...
  5. tg3690

    Irnflatable PFDs revisited

    Bought an Onyx A/M24 to replace my standard life vest recently.....gets real hot down here and the Onyx is so much cooler and light. Forget I have it on most of the time.
  6. tg3690

    Why is the OB overheating ?

    " Pees like an old timer with severe prostrate issues..." :ROFLMAO::ROFLMAO:
  7. tg3690

    Starter brushes

    You are correct again! I meant that getting professional work done by a shop is almost nonexistent. This forum does a great job filling the void, and besides, I would rather do it myself anyway. (y)
  8. tg3690

    Starter brushes

    "Is this the starter from your 78/85hp? It doesn't look like anything I've seen in the Chrysler/Forces???" Jerry.....mine is exactly the same as the one shown in the diagram for my model #.
  9. tg3690

    Starter brushes

    Correct! Figured somebody would notice that. Lol. In the Chrysler Force FAQ sticky there is a thread about replacing the original rectifier with one of these voltage regulator/rectifier units if you were having high voltage problems. I was seeing 16.5 volts at idle and 18+ at higher rpms...
  10. tg3690

    Starter brushes

    Appreciate your input dingbat.....very good advice. Took the starter off to check the positive terminal connection on the back, and to get to the main engine ground connection....much easier with the starter removed. Since I had it off, and it's 42 years old, might be a good time to have it...
  11. tg3690

    Starter brushes

    Thanks Force power.....got it back together on the first try, used some tiny tie wraps to hold the brushes in, pushed the commutator through and the wraps came off by themselves. Did not use any sand paper, just wiped it off with a clean rag and used compressed air. Commutator was shiny...
  12. tg3690

    Starter brushes

    Thanks Jerry....the springs were all the same length, dry, clean, and not discolored. AFAIK...this is the original starter....still has the Chrysler/Prestolite sticker on it. Included a couple of pics.
  13. tg3690

    Starter brushes

    Thank you sir.....didn't see any mention of minimum length in my manuals. Figured I would post a pic and see what yall thought about them.
  14. tg3690

    Starter brushes

    First time tearing into a starter.....wanted to check condition of the internals, especially the brushes....and to see how dirty it was inside. Other than some carbon dust it looked pretty good. Need an opinion on condition of the brushes in attached photo. Look ok? Need replacing? Thanks.
  15. tg3690

    T&T leakdown tests

    Jerry, Force power, and Nordin.....wanted to thank you all for your advice and input. Learned a lot about T&T systems and burned through a little cash getting it fixed....but still cheaper than buying a new one! And like they say........"It's only money!" (y)
  16. tg3690

    T&T leakdown tests

    Update.....got the new bolts installed, bled the system.....motor STILL bled down about a third of the way, then stopped solid. Would not stay fully up. Decided this was not a seal problem or it would go all the way down, like it did before I replaced the VB. Got to thinking I must have...
  17. tg3690

    max Horsepower rating

    Hate to admit it, but until I read this thread I had never even thought about getting liability coverage for my old bass boat. I have insurance on everything else I own, except the boat. Pretty sure my Auto policy covers it while towing, but need to verify that too. I will be calling my agent...
  18. tg3690

    1992 Force 70 horse rebuild

    ^^^X2....Nice work. It may not be the ideal engine to rebuild, but if it works for you, that is all that matters. (y)
  19. tg3690

    It's 2020

    And don’t forget the scourge of all inland boaters......HYDRILLA....also during the 70’s.
  20. tg3690

    It's 2020

    THE HORROR. Lol
View older results
Top