Search results

  1. Bondo

    Where did my oil go?

    Ayuh,..... Just 18 years late,..??........
  2. Bondo

    New Alternator Mount Bracket. Replacing Log Manifolds

    Ayuh,..... The Merc brackets from a late 80s, early 90s will do what you want,..... They need to be for a SBC, or 4.3l though,....
  3. Bondo

    Power Steering Actuator Part

    Ayuh,..... Did you flatten out the locking tab around the bolt,..... It's a right-handed bolt, but upside-down, so make sure you turn it the right way,... 'n while it's in a tight spot, figure out a way to get better leverage on it,.... I donno which actuator ya got, but I believe they've...
  4. Bondo

    New to me used 2.3l

    Ayuh,..... If you don't have P/S, you don't need the cooler,.... By-pass it, 'n toss it,.... 'n No sellin' parts on the forum,...... Rule #8, I think,...... Rules are in my signature,.....
  5. Bondo

    Brass block drain plug leaking like a sieve

    Ayuh,..... This is what I use,......
  6. Bondo

    New to me used 2.3l

    Ayuh,..... That's the fuel pump vent,.... There should be a piece of tygon tubing that runs up to a fitting on top of the carb, or to the flame arrester,.... It's a visual thing, that if empty, all is good, if gas in it, the fuel pump needs replacing,..... The next picture up is the...
  7. Bondo

    My Boat cut out when I hit a decent size wave today. Merc A1G1 3.0.

    Ayuh,.... Good Luck,....... :)
  8. Bondo

    Leak on my Alpha 1 on shifter rod

    Ayuh,..... The special tools to do it right is the expensive part,......
  9. Bondo

    OMC Cobra 305/350 Coil wiring

    Nope,..... No grounding, it cuts the power from the key switch to kill the motor,....
  10. Bondo

    Mercruiser 3.0 L Alpha One Gen 2 Tilt & Trim

    Ayuh,.... That's the whole thing,......
  11. Bondo

    Help with tach repair

    Ayuh,..... Welcome Aboard,...... What motor,..?? What vintage,..?? Got a serial number for it,..??
  12. Bondo

    Terribly stoopid question

    Ayuh,...... What are the motors,..??
  13. Bondo

    Broken "oddball" stern light socket- how to fill old hull screw holes?

    Ayuh,.... Use a sticker if you want,.... PB, is thickened resin, to a peanut butter consistence,....
  14. Bondo

    Broken "oddball" stern light socket- how to fill old hull screw holes?

    Ayuh,.... Considerin' that color would be impossible to match, I'd cut out a small plate outa aluminum, or ssteel to cover the area, 'n then mount whatever stern light that suits yer fancy,..... for the pitot tube holes, marine-tex will fill those holes,....
  15. Bondo

    Still chasing hard warm starting, 7.4 carbed

    Ayuh,..... No worries, it's yer thread,.... Thank you for the update,.....
  16. Bondo

    Priming rebuilt carb

    Ayuh,.... The fuel pump should fill the carb in seconds, if the rest of the fuel system is up to snuff,....
  17. Bondo

    Say it ain’t the transom!

    Ayuh,..... Is isn't there a bolt missing, right where I see the droplets falling,..??
  18. Bondo

    4.3L Carb Mercrusier Auxiliary Heater

    Ayuh,.... Those are the right plugs, but you've got the flow backwards,..... I explained that in my 1st post,.....
  19. Bondo

    Experience with Moeller sterndrive painting anyone?

    Ayuh,.... The rules state, one thread per issue, so do you want to use this 2nd thread, or yer 1st thread on this topic,..??
  20. Bondo

    SERVICE MANUAL 2006 MAXUM 4.3L

    Ayuh,.... I already answered yer question, in yer other thread, in the Merc. I/O forum,.....
Top