Search results

  1. Bondo

    2008 Regal 2200 RX windshield needed

    Ayuh,..... Welcome Aboard,..... Bein' that old, 'n curved glass, used is no doubt yer only option,....
  2. Bondo

    454 vibrating and breaking starter bolts

    Ayuh,..... 454s are externally balanced motors, you need the weighted balancer,.... I merged yer threads, so posters can find the whole story,.....
  3. Bondo

    Decarbonizaton

    Ayuh,..... My ole Land Rover manual suggested, running it up to a couple grand, high idle, 'n pouring a soda bottle of water down the throat of the carb, once a year or so,..... Not that it happens often, but if you Know yer gonna tear down a motor, yer cleaning parts time can be cut from...
  4. Bondo

    Mercarb 2BBL vacuum hose?

    Ayuh,..... Then there should be a tygon tube from the pump's vent, to the top of the carb, or the flame arrester, to dump gas from a ruptured diaphragm, into the throat of the carb, not the vacuum port at the base,.....
  5. Bondo

    Alpha won’t trim underway

    Ayuh,.... It sounds like it's working as it should, so I guess the next step is to test it while running under power,....
  6. Bondo

    Alpha won’t trim underway

    Ayuh,..... Does the pump run up,..??
  7. Bondo

    Mercarb 2BBL vacuum hose?

    Ayuh,... Do you have a mechanical, or electric fuel pump,..??
  8. Bondo

    Mercarb 2BBL vacuum hose?

    Ayuh,...... Ditto, flashback,....
  9. Bondo

    Trim Circuit Breaker

    Ayuh,..... Gotcha,...... I was thinking an auto-reset breaker that fits into most standard or maxi- size fuse holders,.... The ones I've got are 1/4", or 3/8" spade connections,.....
  10. Bondo

    Tachometer backlight

    Ayuh,.... Welcome Aboard,..... Yer pictures suck, can't see ship,.... Is the tach the big gauge, with the huge hole top center,..??..?? If so, the bulb holder is missing,....
  11. Bondo

    Trim Circuit Breaker

    Ayuh,..... Have you tried yer local Napa store,..??
  12. Bondo

    2014 supreme 21s

    Ok, it appears to be bolted on, so,..... Unhook the wiring, remove the bolts, lay it down on cardboard or something, 'n secure it snuggly,.... It appears it can ride just forward of the windshield,....
  13. Bondo

    2014 supreme 21s

    Ayuh,.... Welcome Aboard,.... Not familiar with what you've got,.... Got any pictures,..??..??
  14. Bondo

    Replacing old wiring and fuse block with modern switches/breakers

    Nope, haven't tried them,.... 99% of my wiring supplies come from my local Napa,....
  15. Bondo

    What does this marking mean on this new to me outdrive?

    Nope, more likely the op's initials,....
  16. Bondo

    help with engine block swap

    Ayuh,..... It would help if you answer our questions,.... What style coupler do you have now,..?? What size flywheel are you attempting to use on the replacement motor,..?? Is the block drilled for both starter patterns,..??
  17. Bondo

    9670 Carb question

    Ayuh,.... True enough, but reusing the jets, needles, 'n springs from the Oem carb, would bring it back to spec,..... Unless corroded to crap, I'd just get a kit, 'n rebuild the Oem carb,..... Type in 1409 into the search box on the Edelbrock site to bring up the AFB bible,....
  18. Bondo

    help with engine block swap

    Ayuh,.... Welcome Aboard,...... What's the pattern of yer coupler,..??..??
  19. Bondo

    4.3 Replacing exhaust manifolds - ditch nylon drain plugs?

    Ayuh,..... Yer's,..... one finger, 'n one thumb, preferably on the same hand,....
  20. Bondo

    Will epoxy based fibreglass resin stick to marine ply that has been sealed with an epoxy based sealant.

    Ayuh,...... Welcome Aboard,..... Yer plan should work just fine,.... My tip for good bonding, is to rough sand 'tween each layer,.....
Top