Search results

  1. Wave34

    Is this gypsy worn?

    I have my rode slipping once in a while while retrieving my anchor. To me the teeth of the gypsy look worn. I would like your advice. If they are worn, can the gypsy be flipped sides? Can the teeth be rebuild? (welding and grinding?) Edit: it is a Lewmar winch, but I don't know the model nor...
  2. Wave34

    Is bow stop supporting weight?

    Update; I modified my winch tower and install a bigger winch. I choose a 2600lb (2 speed 5:1 and 12:1 ratios). The 3500lb winch had ratios of 5:1 and 90:1 which Would take forever to crank. I did what you suggested. I moved the winch tower back and let the weight of the boat supported by the...
  3. Wave34

    fishing rod holders questions

    On my boat I have 2 fishing rod holders at the back. They let smell from the bilge come up to the deck near the table when we eat and let the boat with an unpleasant odor. I tried to clean the bilge, but there is still an odor (can't reach everywhere). Is there a plastic cap made to block them...
  4. Wave34

    Is bow stop supporting weight?

    But... like some of you said, my winch is not big enough. While cranking the boat, at one moment it was slightly un aligned and the winch was forcing at a slight angle less than 5 degree, and look what happened!!!! I'm not very impressed with my trailer builder, it's one problem after another...
  5. Wave34

    Is bow stop supporting weight?

    I went to the ramp today, and did some adjustments. Now it sits like it should.
  6. Wave34

    Bilge cleaning not working

    The cleaning is done. The bilge is clean, and the stain is gone maybe 90%. That is ok for now. I think I lost 10 pound in sweat in the last two days working in the bilge with temperatures and humidity quite high for the season. After spending maybe $70 in products, going from brake cleaner...
  7. Wave34

    Bilge cleaning not working

    The bilge seems to have never been cleaned by the previous owners. I would like to make it shine! I tried to brush with a bilge cleaner, but it removes only the loose stuff or deposits. There is a brown-pink color that remains on the gel coat. I tried to use a steel wool, thinner, 3M grey pad...
  8. Wave34

    Is bow stop supporting weight?

    Update; I moved the tower 2.5'' to front and lowered the winch about 1''. Now it seems worst than before. I was not able to crank the boat forward, maybe it is the reason. The way I did it, is I cranked the jack the most I could, I put wood blocks under the hull, then lowered the jack so the...
  9. Wave34

    Is bow stop supporting weight?

    Here is the marking on the winch. You think it's not strong enough? The boat weights about 7500 lb loaded.
  10. Wave34

    Is bow stop supporting weight?

    Yes it is a stopper. But it looks to me like it is supporting some weight, but I'm new to boats so I may be wrong. Here are some pictures of how it is now. The boat should move forward a couple of inches to be flush at the back with the bunks, so I need to move the winch tower forward, and...
  11. Wave34

    Is bow stop supporting weight?

    I need to know if the bow needs to be supported on the bow stop roller. I'm asking because I see that my winch tower is not adjusted like it should, (bow hook not touching the bottom of the roller, and boat could move 2'' more forward) but the bow is snung on the roller. I would like to jack...
  12. Wave34

    Isotherm fridge power supply question

    Hello, is there someone who worked on their fridge and can help me? My Isotherm fridge works perfectly on 120VAC but on a battery, it doesn't cool. I put a LED on the control board and I have 1 flash which is "low voltage''. I measured at the power supply DC input and I have 12V . On the...
  13. Wave34

    New trailer, some questions on setup

    I bought a new trailer last fall just before winterizing my boat, so I didn't have time to test it, I only pulled the boat out of the water once. My first question is about the height of the boat on the trailer. There is 4'' between the hull and the top of the fender. My friend who owns the...
  14. Wave34

    Need help identifying a sensor

    I'm learning my engine, and identified all the sensors except this one. Someone knows? (VP 5.7Gi-D)
  15. Wave34

    Is this a marine starter?

    When I bought the boat, the guy gave me a spare starter. I tested it on the bench and it works fine. It looks like a rebuilt from a local shop since there are no stickers on it. I don't know if you guys just by looking at the pictures can tell, but let's try.
  16. Wave34

    Dogs and boats

    I had a German Sheppard in the 80s but after this dog, I've been dog-less since then. Wife and I working outside, we didn't want a dog to stay alone every days. Since we are now close to retirement, the idea of having a dog is more and more present. BUT, a big BUT, we just bought a boat last...
  17. Wave34

    I removed my outdrive and didn't find what I was expecting

    New boat, so as preventive maintenance I decided to remove the outdrive. I was expecting a dry bellow, but found a pool of oil. What is strange, is the the 2 U-joints seem dry, no dripping. The week before, I changed the oil. Is it possible I filled too fast? I don't think, it took me almost 45...
  18. Wave34

    5.7 gsi iac

    I wanted to see it also. I googled the Sierra number and found this. Amazon.ca will always amaze me LOL
  19. Wave34

    Moving axles; inches vs % need help

    I just bought a trailer for my 26' cruiser. The axles are adjustable. The boat sits flush at the transom and rear of trailer. I went to a public scale (multi plates) and found that I have 14% of tongue weight. I would like to reduce it to 10%. Can the distance the axles need to move forward...
  20. Wave34

    Engine alignment tool compatibility Merc vs Volvo

    I need to buy one, but all I see on EBay is listed for Mercruiser and OMC. I contacted the seller, and he said 'it should' but not 100% sure. Does someone know if this tool will work? https://www.ebay.ca/itm/281105345554?ul_noapp=true
Top