Nice write up
Just guessing, but if it was raw water cooled or if HE was removed it would be a bit easier :unsure:
Your thoughts?
Raw is 10lb in 5lb bag, with HE is 15lb in 5lb bag
I also messed up and called in Wolf river marina, it's Wisdom that is on wolf river which is one of the rivers that make up Dale
https://www.facebook.com/photo/?fbid=976002084198236&set=pcb.2801903189962488
Had 3 EF1's hit us last Sunday, and it hit pretty hard Wisdom Marina
I just had a few large limbs but no damage. Did have a large oak come down behind the barn but didn't hit anything
There is a misunderstanding in terms between us
Your pic shows the slave relay, the starter solenoid is on top of the starter
Lets start again clean
What is your motor serial number, or at least year and type?
Most boats don't have schematics, they use standard practice for wiring circuits. Don't know if Stingray uses additional feed from battery to helm, but they should.
@cyclops222 I'm going to recommend allow this thread to go forward as it was intended from the beginning. Providing input of what may or may not be true is not helping.
Comments are welcome so long as they advise of real world testing/analysis. Ted is working hard to get this right and most...
Trim pump comes off start Bat at starter post because it's next to the motor
Anchor windless comes off House Bat
Blower comes from the helm and is powered from start Bat Aux power feed
Bilge pump is connected either directly to the start Bat or from common terminal at Bat switch
Try this it's real easy, simple and only takes a few seconds
Large flat tip screw drive and back out the top vent plug on starboard side of drive
Back it out slowly until you can get some drive lube come out of the plug. The lube should be greenish and thick.
Don't worry if a bit much comes...
