Search results

  1. roscoe

    2001 nitro 700 lx NEED INFO

    recheck year and model. Its not showing up on NADA or boat spec. A 20 year old boat, all components are suspect, floor, stringers, transom, electrical, engine ignition, gearcase, compression, everything. And no sale without an on water test drive.
  2. roscoe

    Angels shaking out their Dandruff.

    Location is in signature. You must be viewing on a phone . Currently just down the road from Chili WI, headed to Central City WI, then back to Colby WI. Half way between Green Bay and Minneapolis. Real close to 45*N and 90*W
  3. roscoe

    Angels shaking out their Dandruff.

    Already got 7" in the last week. Forecast for 9" -14" starting Friday at 3pm. Or 7" - 12", depending on who's forecast you read. With some localized areas getting 17". Add in the 15-20 mph winds, with gusts to 30 mph and it will be fun. Now it feels like Christmas. Supposed to work till 2 am...
  4. roscoe

    Bearing Buddies

    That would NOT be a sure-lube or dexter E-Z lube. They have no moving parts, no spring either. TieDown Super Lube hubs have a zero on the back side of the hub. Dexter E-Z Lube
  5. roscoe

    2016 Alumacraft transom rotted completely out.

    strange
  6. roscoe

    1996 Force 120 with crazy compression numbers

    FYI, I had 145-150# in my '95 Force. And 148-160# in my 1997 Force.
  7. roscoe

    Chieftain 24 seat height

    With it way up in the air like that, you could easily end up in the drink if hit by a wave. Keep the seating surface below the gunnel.
  8. roscoe

    Help, please. Do I have a chance in finding this part?

    Tohatsu part distributors worldwide. https://www.tohatsu.com/marine/int/distributor.html Tohatsu parts distributor in Greece. GREECE PETROS PETROPOULOS AEBE 96 - 104 IERA ODOS P.O. BOX 41018, 122 10 ATHENS, GREECE TEL+30-210-3499200...
  9. roscoe

    Newbie looking for advice

    I say outboard deck boat, or pontoon. A pontoon can be set up with a small head and a changing room. .
  10. roscoe

    Towing Boat In Cold Temperature

    Just make sure the boat is secured tightly to the trailer. You don't want the boat bouncing on the trailer. You want the trailer to bounce on its springs to absorb any hard hits.
  11. roscoe

    Too windy?

    We were out on Halloween weekend, Fox river in Green Bay, 15 mph winds blowing right up the river against the current. It was rough near the mouth, but not too bad as we went upstream where there are just enough slight jogs in the river to keep the waves from building too big. Still, managed to...
  12. roscoe

    Using a Manual jack plate to fit a 25” shaft motor

    What Jim said. Can be done if you can mount the jack plate higher, or high enough. Or, if you have room to drill more holes.
  13. roscoe

    Best finance options

    From an investment view, it has liability risk and depreciates.
  14. roscoe

    25 hp on. 1975 StarCraft Holiday 16 ft

    The Holiday 16 is an aluminum hull that weighs in at 640#. Also, built in an era when hulls were rated much higher than they were after 1980. I've personally had 4 1960's and 1970's boats, aluminum, 16', 400# - 685#. All rated for 65-80 hp. All planed with a 25hp and 2 people. And all worked...
  15. roscoe

    Trolling motor pivot pin

    Ok, sorry for previous post, seems I missed where you said part "33" in your post. Just went out to look at mine. What dwco recommended, with punch dents at one end seems like an easy fix. Just be aware that the rough dimple edges may scrape away at the aluminum casting in another decade. Is...
  16. roscoe

    Best finance options

    Its a depreciating LIABILITY, not an asset in my opinion.
  17. roscoe

    25 hp on. 1975 StarCraft Holiday 16 ft

    While the boat is light, and they were rated for massive hp compared to other boats, I know I would not be content with a 25. It is very close in design and weight to the 16 SuperSport, and a 35-40 hp seems to be the minimum recommended in the starcraft forum. I had an old tired 50 on my...
  18. roscoe

    Just bought this Snowblower ,Good,bad ??

    Same drive system on dad's old -- 1969 -- snapper rear engine lawn mower. Had to repower her in 2010, still going strong.
  19. roscoe

    Trolling motor pivot pin

    Which part number is the pivot pin ? I thought I was gonna love my 80# 3x. After I got it, well, I never did fall in love with it. Tried it on 3 boats over the course of a few years before I decided to sell it. Couldn't sell it for even $150. Now it sits in the shed, collecting dust for a dozen...
  20. roscoe

    FUTURE of TWIN Gas / diesel engines in boat , who can afford fill ups

    What Scott said..... Divided by 10. LOL
Top