Search results

  1. Bondo

    Marine Flywheel compared to an auto flywheel

    Ayuh,.... I used a short piece of pipe(that fits inside the hose) that I drilled, 'n tapped for a drain fitting, then mounted it just before the P/S cooler,..... It drains that hose, 'n the P/S cooler,....
  2. Bondo

    3.0 mercruiser ran for 5 min good. Then Just died?

    Ayuh,..... I'm thinkin' ya got a fuel supply issue,..... No idea what the clicking noise is,..... it's a new one for me,....
  3. Bondo

    Kohler 5E No Spark at both coils

    Ayuh,...... Welcome Aboard,..... We don't have a gen-set forum, 'n yer's ain't diesel powered, so I'm gonna move this to the electrical forum, rather than this diesel forum, to see if I can get ya some answers,......
  4. Bondo

    90 amp starter fuse

    Ayuh,..... Welcome Aboard,...... I gave you a thread of yer own, insteada that 10 year old, 2 page long thread that you hi-jacked,.... Dependin' on which motor, 'n the way it's dressed has alot to do with that big fuse on the end of the battery feed cable,..... Which btw, brings up the...
  5. Bondo

    OMC Cobra water pump

    Ayuh,..... I gave you a thread of yer own, rather than the 20 year old thread you hy-jacked,.... How are you feeding water to the drive,..?? A big bucket won't work,.... You need a quality set of muffs,.....
  6. Bondo

    Truck cam with captain's choice?

    Ayuh,..... Welcome Aboard,..... Go ahead, 'n rebuild yer truck motor, 'n drop it in, No problems I can see,.....
  7. Bondo

    Marine Flywheel compared to an auto flywheel

    Ayuh,.... Slip a hose pick in under it to pop it free,.... Try the other end if necessary,.....
  8. Bondo

    Ford 302...21 foot fiberglass with cuddy

    Ayuh,.... The motor still has to be able to spin it at 4200 to 4800, or yer luggin' the motor, at all rpms, which induces detonation, which burns holes in pistons,....
  9. Bondo

    1986 Merc, start and trim problems

    Well,.... This alittle outa my league,.... But,...... Yer trim switch, should have 3 wires, blue(up), green(down), 'n red, battery power,..... When pushed, the switch powers the blue, or green wires,..... Do you have power at those blue, or green wires at the solenoids,..?? Are those...
  10. Bondo

    Ford 302...21 foot fiberglass with cuddy

    Ayuh,..... What ratio drive,..?? You got that V8 Ford, right,..?? 351, or 302,..?? 2bbl. or 4bbl. carb,..?? How big/ heavy is the hull,..?? You might have to go all the way to a 15" prop, or lower gears in the drive,.... Or,..... yer motor is under-performin',.......
  11. Bondo

    gimbal bearing install

    Ayuh,..... How did ya drive it in,..?? there's gonna be resistance, as it's a resistance fit, ei; driven in,.... If ya drove it in, by only hittin' the outside aluminum collar, all ya gotta do now is align it,.....
  12. Bondo

    Replacing hub. New one won’t go on. What’s wrong? Do I need a new axle?

    Ayuh,..... Welcome Aboard,..... I use a flat file to remove burrs,.... It ends up quicker, easier, 'n smoother, than sand paper or emery cloth,.... The bearing race should just barely slide all the way onto the greased shaft,...
  13. Bondo

    Getting Transducer Parrallel

    Ayuh,.... Just eyeball it,..... How often out on the water is a boat, dead level,..?? I'm guessin' next to never, with the wind, waves, 'n currents,.....
  14. Bondo

    Canoes Is there a department dedicated to canoes?

    Ayuh,..... Welcome Aboard,..... No strictly canoe forum, but if yer lookin' at fiberglass work, yer in the right place,...... As for who originally built it,.... Does it really matter,..?? it is what it is now,..... With old boats, you fix or build what you need,.... manufacturers are...
  15. Bondo

    1966 Starcraft

    Ayuh,.... Check for corrosion on the points,.....
  16. Bondo

    What Lube to Pull (or Push) Fuel Fill Line through ABS Pipe?

    Ayuh,...... With Power Tune, you could push a 1/2" rubber pipe, through a 1/4" hole,....... Amazin' stuff,.....
  17. Bondo

    6.2 vortec head torque setting?

    Ayuh,..... I'd just run it,......
  18. Bondo

    Ford 302 flywheel direction

    Ayuh,.... I zoomed in on the 1st picture, the one that looks like a cap screw, is a nut, but the stud is screwed in to deep, before the nut went on,.... They all should have the same thread reveal,...
  19. Bondo

    Ford 302 flywheel direction

    Ayuh,.... Looks Ok,.....
  20. Bondo

    Anyone know what this nut is called?

    Ayuh,...... Looks like a pain in the azzz to me,..... ;)
Top