Search results

  1. alldodge

    1940's crestliner

    Welcome Being from the 40's it won't have a hull number. I would post some pics to help the folks. Select the box labeled "Attach files" to upload
  2. alldodge

    Prop' set suggestions for Bravo 3x coupled to 250hp Vetus diesel 4,200 rpm max. (UK based)

    No, note the different diameters https://www.generalpropeller.com/bravo-three
  3. alldodge

    Oil pressure

    Vid doesn't show anything useful that I can see
  4. alldodge

    Fell for my first scam but fixed before anything happened

    We do Ctrl+Alt+Delete and shut down the browser using Task Manager
  5. alldodge

    Fell for my first scam but fixed before anything happened

    Wife has had the "do touch anything call Microsoft at number below" many times by clicking the wrong thing on FB Luck she now knows how to get out of it and resume
  6. alldodge

    Oil pressure

    It didn't leak any oil and now it drains out as fast as it's poured in? Drain plug issue
  7. alldodge

    Not What I Expected

    Same as going to any burger joint, you never get one like you see on TV, but then again who wants one with hair spray, tooth pics and wax
  8. alldodge

    Fell for my first scam but fixed before anything happened

    The DNC?
  9. alldodge

    Fell for my first scam but fixed before anything happened

    Your missing most the fun. I let them come in to get their info. Once I have it I report to FTC under do not call list and it cost them 1,500 bucks each yime
  10. alldodge

    Fell for my first scam but fixed before anything happened

    Have Dish and from time to time have received calls which ask if I want to upgrade and always say no. They are always from India and ok, nothing ever happens Get a call today asking for the receiver info and they want to verify what they have. I give them the info from the TV. Then the guy...
  11. alldodge

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Correct
  12. alldodge

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    The rams are self bleeding. Raise and lower a few times and, and so long as the fluid stays up in the pump and does not foam, your good to go The ram is a simple hydraulic cylinder and has internal seals to keep oil on each side without leaking. Over time seals wear out and they can start to leak
  13. alldodge

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    If leg drops any when raised by the pump and there is no oil leaking inside or outside the boat, then the leak is internal. Most likely cause is the trim rams and rebuilding them is easy
  14. alldodge

    Mercruiser Oil Gauge pegged KOEO

    The gauge pegs if its on the bench or in the boat. This says the gauge is the problem North American standard is 240 ohms (cold/low) to 30 ohms (hot/high) So when the sender wire is grounded the meter will peg. The European standard is reversed, so when wire is grounded it will go low/cold.
  15. alldodge

    Oil loss Base transom by axis Drive shaft oil seal on Yamaha Hydra drive DE-DHD

    Welcome Don't know your motor but with the seal leaking after replacement would tell me that the bearing holding the shaft is most likely the issue. There is most likely to much play and the shaft is moving laterally
  16. alldodge

    Need help with my situation

    Don't know the cost but it might be a BS CA cost. I would tell them I would come out with all the rags, dry sweep, and cleaner and they can advise if that is good
  17. alldodge

    Looking for a ramp systm that slides up under bow of pontoon boat

    Appears there is a few models out there just search on pontoon ramp https://www.iboats.com/shop/jif-marine-llc-pontoon-boarding-ramp-anodized-alum-incl-hardware-jif-marine.html
  18. alldodge

    Outboard Ignition Switch Wiring

    Welcome My guess is there is a weak battery, corrosion or a bit of both A fully charged 12V Bat should read close to 12.7V. Put meter probe across the Battery post, then crank motor and see if it stays close to 12V If voltage drops low then need to start cleaning connections. Start with both...
  19. alldodge

    Kad32 Turbo

    Needs another one
  20. alldodge

    Yanmar 4LHA STP boat speed down

    If 26P props turn the same rpm as the 24P props, then something else is happening. The props should reduce max rpm as pitch increase. If boat is using the same outdrive so we are just looking at amount of power being produced. Now if rpm is reducing then need to increase pitch more or use a...
Top