Search results

  1. alldodge

    Pinion gear timing to driven gears in B3 upper housing

    Thanks, I changed to correct one
  2. alldodge

    Pinion gear timing to driven gears in B3 upper housing

  3. alldodge

    MDS holding tank capacity

    If you can see the tank, measure it and calculate capacity
  4. alldodge

    Where can this water be coming from?

    Could be old age and way back when the motor was made they used steel plugs and not brass or stainless. Could be all you need is a 50 cent plug, but need to remove motor to find out
  5. alldodge

    Where can this water be coming from?

    Do agree appears to be core plug. The age of the motor it might be the plug is rusted thru. Still need to pull motor to find out
  6. alldodge

    Voltmeter vs alt output

    Might be a bad boat meter but the easy determination is with a hand held volt meter. Place meter probes on the Bat and see if boat meter matches hand held
  7. alldodge

    Need help identify part

    That is part of the exhaust shutter. The shutter slowed the water exiting the drive and this is what caused the water tube to melt. Your lucky it didn't overheat
  8. alldodge

    Can anyone identify the type of boat in this painting?

    The eye leans me to Egyptian or Polynesian but that's about it for me
  9. alldodge

    Off-Season Float Battery Charging, 2 Batteries

    Welcome Bat switch OFF and 2 chargers Using 1 charger and Bat switch on Both can work if both Bats are in same shape. If one has a problem it will take them both down
  10. alldodge

    330 black scorpion low power

    Anyone who doesn't break up the paragraph, makes it harder to read
  11. alldodge

    330 black scorpion low power

    Sure wish more learned to use the return key o_O
  12. alldodge

    Tree sap on cover

    With most materials, once something gets down into the fabric, it's very hard to get out. As you other thread folks are saying the same https://www.tinboats.net/threads/help-my-nice-one-year-old-sun-dura-boat-cover-is-black-from-oak-tree-sap.51116/
  13. alldodge

    Mercruiser Alpha One, Gen 2 prop shaft rear seal r&r

    As Scott06 mentioned, a seal leak in most cases is not just a seal leak, the seal leaks because something changed
  14. alldodge

    Sea/Lake Food

    Opened the packages up and started to vuc-u-seal them and one package 2 of the steaks had some green on a couple of them. Had a light but bad smell to it. So oh well, when in doubt trow it out. The other package was fine but so the 2.99 went to about 5.50 lb. The second package had smaller...
  15. alldodge

    98 40hp, chrips then cuts off

    No expert but maybe my comments will bring them in With a chirp and then dies, and to add nothing happens when key is turned, sounds to me like bad or loose connection. Might be the key switch, maybe a chafed wire and when throttling back something makes contact. A bad connection will heat...
  16. alldodge

    Sea/Lake Food

    Nor would I (y)
  17. alldodge

    Mercruiser Alpha One, Gen 2 prop shaft rear seal r&r

    Welcome Don't know the year of drive serial number Don't think that will work, there are 2 seals in that location, one behind the other (items 56 and 57) https://www.mercruiserparts.com/bam/subassembly/30862/2686/150
  18. alldodge

    330 black scorpion low power

    Your throwing parts when the problem is yet to be found. The motor needs to be scanned for codes. You have a MEFI 3 ECM so checking for codes is easy Might be the MAP sensor or a bad sensor causing the 5V supply to drop below 5V. Measure the MAP or TPS to see if voltage is exactly 5V with...
  19. alldodge

    MR outdrive

    We could use some @Bondo input on this
  20. alldodge

    Herters 13.5 Needs a Motor

    The Suz 16 motor weight listed at 90LB The new 15 or 20HP motor weight is 107LB so not that much more
View older results
Top