Search results

  1. alldodge

    New boat- high idle 5.7 efi

    Your TB will have a plug on one side which can be removed and gauge attached (Item 1 or 3), other side is fuel line https://www.mercruiserparts.com/bam/subassembly/31844/2704/110 Or can get 91-806901 and remove fuel line and attach it
  2. alldodge

    New boat- high idle 5.7 efi

    Fuel pressure should be 30 psi at 1800 RPM EST distributor timing set at 8* BTDC using base timing mode
  3. alldodge

    2004 mercury 90 four stroke EFI not charging

    Have ya checked fuses?
  4. alldodge

    Cyclone S jet boat need help

    Maybe we should discuss in Mod section becuase it was there and no one mentioned anything. Got some notice here. What about other jet drives?
  5. alldodge

    MERCRUISER 5.0 MPI 2005 ALARM NOT MORE THAN 2500 RPM

    2 Beeps a minute is for a open of short in a sensor. Need to scan for correct code but lost likely it's the trim sensor
  6. alldodge

    Pivot assembly removal volvo dpsm

    Hey @kenny nunez or @Scott Danforth
  7. alldodge

    VP 4.3 MPI sluggish on holeshot

    Fuel pressure should be 43 psi at 1800 RPM Plugs AC 41-932 gap 0.060 Timing is HVS distributor and is set by position and not but a light
  8. alldodge

    AQ131A Carb idle screw Missing

    No clue, but contact Mike's Carbs and he just might know
  9. alldodge

    Broken steering cable Superhawk

    Welcome The cable should have a part number on it every few feet I would replace the helm and cable with new unit
  10. alldodge

    2020 ish Camaro 6.2 or Mustang, 5.0?

    I would go, never mind not one of the choices :oops:
  11. alldodge

    New boat- high idle 5.7 efi

    what's the serial number?
  12. alldodge

    Canceling DISH account....

    Wonder if it is a weekend thing. They may not be required to work that area on weekends
  13. alldodge

    Canceling DISH account....

    Dang, might suggest contacting you state consumer protection, attorney generals office. Soon as I get broad band I'm cancelling dish also
  14. alldodge

    Cyclone S jet boat need help

    It's one of those that isn't an OB or Inboard this is why I put it here. If another Mod want's to move it elsewhere I'm ok
  15. alldodge

    7.4 not running right

    Need to figure out is it fuel, spark or motor. Does the new motor have a flat tappet or roller cam? If flat was cam broke in? You sure the tank was completely empty as in bone dry? Could dump contents of the filter into clear container to see if anything is there but clean gas Check timing
  16. alldodge

    OMC 350 not starting (I need suggestions on why)

    Then look for ignition fuse
  17. alldodge

    2015 Motor MerCruiser 4.5L 250hp NO EC - OVERHEATING!

    Thanks My Chap 280 has twin 250 Verado outboards
  18. alldodge

    2015 Motor MerCruiser 4.5L 250hp NO EC - OVERHEATING!

    Picked up my grandson today You have done great work, the puzzler for me is why water doesn't move up the hose to the crossover instead of it going down.
  19. alldodge

    Do new fuel pumps come with a filter pre loaded

    !0 micron is what you want and the pump will have no issue with it. Only time it ever will is if it gets clogged up, which hopefully will be a long time
  20. alldodge

    Maybe my turn for new boat time

    Get to sell more joystick control maybe :rolleyes: :unsure:
Top