Search results

  1. R

    1970 evinrude 115 - cdi pulse pack shortens out starter?

    Take starter apart for inspection.-----Do ohm checks.
  2. R

    Repowering from 1996 112 evinrude to 1995 115hp evinrude help

    Remove one motor and install the other.-----No need to change controls.----Install new water pump impeller.----Change gear oil.-----Commision the oil injection system ??----Test the oil injection system.----Perform compression test and record numbers for future reference.
  3. R

    1986 Evinrude 110 fuel issue?

    Post the actual values after doing a compression test.---Post them here.
  4. R

    Low RPM on a new outboard...All suggestions welcome

    Was the correct propeller installed?------
  5. R

    1976 mercury 1150 115hp runs on muffs but not in lake

    Open low speed fuel mixture screws 1/8th turn at a time and test run.
  6. R

    Fiberglass resin question

    I use West System epoxy.---More beer tokens I know.------I can no longer tolerate the smell of the polyester stuff.
  7. R

    Is my engine mounted low enough?

    Strange how people come looking for suggestions and then mock the people offering the suggestions.----I think adding 5" (12.5 cm ) to the motor is a top notch solution.----Sorry if it does not fit your budget.-----Not going to get much more help on this forum I think !!
  8. R

    115 Johnson v4 2000 trouble staying started oil/gas leak from exhaust

    Yes----It is always the carburetors.----Might as well rebuild them.-------Or perhaps do some easy trouble shooting first.-----This motor should at least fire , bark and roar when cranking with key pushed in , does it ???
  9. R

    Is my engine mounted low enough?

    I think you need a bigger boat.
  10. R

    Is my engine mounted low enough?

    Have you established a price for a kit ??----Why do think this suggestion is funny ??
  11. R

    1966 Johnson Motor

    Cable for the electric tilt has 3 wires.
  12. R

    Rescued 69 Evinrude Rogue with stringer need beginner tips

    Any pictures of this Buick 300 CI engine?-----A V-6 or V-8?
  13. R

    Did I Spin My Prop Hub?

    Perhaps look at what parts you marked.----I think the prop hub is spun !
  14. R

    e70elcdc 1986-1987 Turns over no spark

    No money spent to charge the battery , load test the battery.-----Take starter apart for inspection.-------Or just replace the powerpack as that fixes them 9 out of 10 times.
  15. R

    Is my engine mounted low enough?

    Get an extension kit.---Add 5" to the length of the motor
  16. R

    Is my engine mounted low enough?

    Missed the part about the bracket being in the UP POSITION in post #1 !!----So what is the concern here ???
  17. R

    Is my engine mounted low enough?

    I have been around sailboats since 1980.----I would not leave the marina with a motor mounted like that.----Hopefully you installed a new impeller in the 1984 / 85 motor every 5 years.
  18. R

    Is my engine mounted low enough?

    Engine needs to be lowered about 10" for proper propulsion on a sailboat.
  19. R

    Old Evinrude question, Can anyone help?

    Running / revving in neutral means nothing at all !!
  20. R

    Fresh water corrosion and anode choices…

    Tilt the outboard up when in the marina.
Top