Search results

  1. Bondo

    3.0 exhst riser 1/8NPT drain plug ALUMINUM?

    Ayuh,...... Never seen an aluminum one,..... Brass, Yes,....
  2. Bondo

    Help with MC ID

    Ayuh,..... It's a late model MC-1,...... Those plastic plugs are added when repairin' the swivel pin, not a from the factory item
  3. Bondo

    Another engine temperature issue

    Ayuh,...... Is this new freshwater systems, on older motors,..?? Have any flow tests been done on the H/E's,..??..??
  4. Bondo

    wellcraft not charging

    Ayuh,..... Welcome Aboard,..... Any chance ya got the serial number of the motor that's in the boat, to tell which alternator you've got,..?? Basically, the orange wire goes from the alternator to the starter post to charge the battery,..... There'll also be a hot wire from the ignition...
  5. Bondo

    Bellows Adhesive application

    Ayuh,...... I've never ever used any sorta sealant on those points,...... If I did, I'd reach for Perfect Seal, over bellows adhesive,....
  6. Bondo

    PCV Question

    Ayuh,...... The flame arrester should have 2 hose connectors,..... I'd fab up another connector for the other side, myself,..... It don't take much to hold the end of the hose close to the screen,.....
  7. Bondo

    Engine stalling at idle

    Ayuh,...... Welcome Aboard,...... Which motor,..?? Carbed, Efi, or Mpi,..?? Got a serial number for the motor,..??
  8. Bondo

    Alpha drive play in prop shaft

    Ayuh,..... In- out play is completely normal,......
  9. Bondo

    Trim cylinder burst... twice ???

    Ayuh,...... Did it twice myself, on an ole MC-1, with the reverse lock valve on the return line, hooked to the shift cable,....... In forward, the lock valve is open,...... In reverse it's closed, 'n I jumpered the trim pump, which of course overloaded the system, 'n blew out the side of the...
  10. Bondo

    What to do....(engine/outdrive compatibility)

    Ayuh,...... I too, have that affliction,.....
  11. Bondo

    Hey, My signature is back,........

    I didn't "Fix" it,..... Did photobucket give up on the harassment,..?? Movin' all my pictures, somewhere else is another of those jobs I never seem to get too,.........
  12. Bondo

    I'm Movin',.......

    Ayuh,..... Through the amazin' twists, 'n turns of life, I guess even long term Plans change,.... I thought for Sure, that when I bought my lake house in '05, I bought the place where I would someday, die,..... I was wrong,...... I'm movin' again,...... The progressive capital of the planet...
  13. Bondo

    Has anybody converted a merc p/s actuator into a hyd. steering ram,..??..??

    Ayuh,...... Lookin' at my steerin' options for the Old Town Atlantis project,...... Could buy a new helm,'n cable, 'n go with the conventional merc p/s,..... Or,..... I've got a hyd. helm that came outa a Tres Martin off-shore race boat that I bought off his wife some years ago,...... Got the...
  14. Bondo

    How fast does liquid nails take to set-up, reasonably solid,..??

    Ayuh,..... Hi All,..... I'm lookin' for a brand/ product to stick glass covered plywood "into-place" that sets up quickly, 'cause some of these, I'll be holdin' by hand, til it stays, so I can then glass into place, with cloth, 'n resin,..... Something that sets in like 5 or 10 minutes...
  15. Bondo

    How biga heat exchanger do I need,..??..??

    My Old Town Atlantis project is movin' forward, 'n I'm considerin' a closed coolin' system for it,..... I've got a 22.5"x 4" heat exchanger, which I pretty sure will cool the 350 that's goin' in for power,..... But,.... I'd like to put the exhaust manifolds on the coolant side too,..... So the...
  16. Bondo

    I'm not usually one to toot my own horn,.. But,.....

    MOD EDIT - Ayuh Toot, Toot, Tooooooooooooooooot,...... This is my 65,000th post here at iboats,............. :D ;)
  17. Bondo

    Need a wiring diagram,.....Originally posted by dricouard

    Ayuh,..... Welcome Aboard Dave,..... Now you have a brand new thread, All yer own,.....
  18. Bondo

    exhaust - Resolved

    Thank you for destroyin' this thread,.... I'll keep this in mind, the next time you come askin' questions,.....
  19. Bondo

    Mixed feelin's,....

    Ayuh,.... It's with mixed feelin's that I make this post,.... I've had the highest post count of any livin' members of iboats for a couple years now,.... Seems like I've been chasin' dead guys for an awfully long time,.... 1st TD,.... then Don S,..... Thankfully, I passed JB before he left...
  20. Bondo

    Ayuh,.... The drought is over,.....

    Ayuh,.... I spent today putterin' on the brown house nextdoor,.... Water was where I expected it to be,... Tom, next door is runnin' pumps, whenever the surge rolls in,... We're all just hopin' the wind don't start blowin' at this point,... Local newspaper reported stopped by, 'n rang the...
Top