Search results

  1. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    Am sure there are other sites folks use.....have bought parts from him before...you can call and talk to him if you have questions...good man. (y)
  2. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    There are several bolts that hold the cover onto the head.....but all the head bolts go through the cover, so the head bolts will have to come out to get the cover off.
  3. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    Didn't have access to my manual.....got that info from Mastertech marine....they have more torque specs listed also. Go to Technical Specifications tab, then Chrysler/Force tech specs.....
  4. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    Yes there is....225 In Lbs for the head bolts....or 18.75 Ft Lbs.
  5. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    On my motor they don't list a gasket for the cover, manual says to use a sealer....FYI.
  6. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    Need to do something about the water in the cylinder......checked that part # on marineengine.com, that # is for a gasket....after 3 or 4 part number revisions it is listed as a sealer only...they show to use Loctite 587 Blue instead of a gasket for the head cover.
  7. tg3690

    What is the PURPOSE of Outboard Cylinder Drain Reed Plate (see pic)

    The check valve is built into the fitting the hose pushes onto on the dog bone.....might spray some carb cleaner in there to clean it.....take the boat out and see how it does on the water, under load. Sometimes it runs great in the driveway, and different on the water.
  8. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    Sounds like you are on the right track.....in that pic hardly smoking at all.
  9. tg3690

    1972 Chrysler 85, Tolletson carburetor tuning

    Running at idle on muffs for extended periods, the plugs tend to get fouled....and without a thermostat will make it worse since engine will not be at proper operating temp. A good Italian tune up on the water will clear it up usually.....
  10. tg3690

    What is the PURPOSE of Outboard Cylinder Drain Reed Plate (see pic)

    No problem.....if you still have issues after this there are some hard hitters on here that can help you out for sure. (y)
  11. tg3690

    What is the PURPOSE of Outboard Cylinder Drain Reed Plate (see pic)

    Mine has little metal screens behind each of the reeds.....make sure they are clean......and the hose running to the intake, check to see if it plugged up. Not much to it really.....
  12. tg3690

    What is the PURPOSE of Outboard Cylinder Drain Reed Plate (see pic)

    It's a cover for the recirculation system, referred to as the "dog bone". The recirc system takes unburned/excess fuel from each cylinder and routes it up to the intake where it is run through again. Can cause issues if it becomes plugged up....poor idle, sluggishness, etc.
  13. tg3690

    Artificial Intelligence parts finder

    Thanks for that link.....didn't know they had apps for that. Probably what the guy at Ace used......
  14. tg3690

    Artificial Intelligence parts finder

    Agreed......just thought the way he found the right valve stem was impressive, and saved me a lot of time trying to find the right one.
  15. tg3690

    Artificial Intelligence parts finder

    The 30 something year old faucet in my shop's bathroom started dripping, so I took the old valve stem and seat/spring down to the local Ace hardware to see if I could find the parts.....had no idea what brand or model the faucet was. The Ace guy took a pic of the stem using their app.....the...
  16. tg3690

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    You gave me the same advice when I replaced my PH.....and that is exactly what I do......(y)
  17. tg3690

    Force 70 HP - Full throttle in reverse but underpowered in forward

    Running it up to WOT at home......on the muffs....in gear? Or using a test wheel in a test tank?
  18. tg3690

    How to take out rounded drain plug on force 85? Is there a way to drain without taking it out? Like pumping out the fluid maybe?

    Could maybe use an extractor a little larger than the stripped out hole, tap it in, twist it out. Corrosion shouldn't be an issue, being a lube plug.
  19. tg3690

    How to take out rounded drain plug on force 85? Is there a way to drain without taking it out? Like pumping out the fluid maybe?

    It may be the type that uses an allen wrench to remove.....not a slotted type.
  20. tg3690

    40hp shearing flywheel keys?

Top