Search results

  1. JASinIL2006

    Rehabbing my trailer...

    Re: Rehabbing my trailer... I just rehabbed the boat on the trailer. I didn't remove the cap, so I didn't build a cradle or do any additional bracing. For pulling the engine, I built a gantry crane, which has since been disassembled and the wood has found it's way into several other projects....
  2. JASinIL2006

    improve efficiency of gas fireplace?

    Hi all, we have a natural gas-powered fireplace in our basement, installed by a previous owner. The fireplace is one of those 'cool' 1960's conical style fireplaces, sort of like this one: For reasons I can't really explain, I kind of like this old fireplace and I don't want to get rid of it...
  3. JASinIL2006

    Reupholster Cockpit

    Re: Reupholster Cockpit Tell her the dog has to wear these when on the boat: :joyous:
  4. JASinIL2006

    Rehabbing my trailer...

    My trailer is in need of new carpet for the bunks (and maybe new wood as well), and the carpeted boards that cover the wheel wells are in pretty bad shape and need to be replaced. I think those repairs will be fairly straightforward. I'll get some new bunk carpet and either stainless steel or...
  5. JASinIL2006

    Deck coating / Turned complete restore

    Re: Deck coating Re: Deck coating Here are some pics of the problems I've got with Durabak on my boat floor. (Full coverage of the installation is in my resto thread linked to in my signature.) Some of the Durabak peeled off the base of the seat pedestal. I suppose this could be a problem...
  6. JASinIL2006

    GPS flakes out when I restart engine

    Hi, I have a Humminbird 385ci GPS+Fishfinder on my boat. I use this not only as depth finder but also for the GPS speedo feature, which is really nice when I'm pulling skiers or tubers. I really like this unit, but every time I turn off the engine (i.e., to allow a skier to climb in or out of...
  7. JASinIL2006

    Does this drive shaft look normal?

    Re: Does this drive shaft look normal? Just ran out and checked it... the gimbal bearing turned smoothly with no looseness or slop. Felt like there is lots of lube in there. No grinding, grittiness, etc.... I found some pictures from last year when I pulled the drive: I don't see that...
  8. JASinIL2006

    Does this drive shaft look normal?

    Re: Does this drive shaft look normal? Seemed to be fine all summer... it was making no noise, steering was smooth... I pumped it with lube last year when I put the drive in. I don't know if it shows anything helpful, but here's a picture from inside the bell housing after I removed the drive:
  9. JASinIL2006

    Does this drive shaft look normal?

    I pulled the outdrive recently for winterization and storage, and I am concerned about the appearance of the driveshaft. (This is the second winter I've pulled the drive, but last year I was preoccupied with having to pull the engine and work on the transom, so I wasn't as observant as maybe I...
  10. JASinIL2006

    Rotate tires?

    I can't recall seeing this before, but since I'm getting ready to do some off-season maintenance... Is there any need to rotate tires on a trailer? I have a single axle, torsion spring trailer pulling a 19' I/O fiberglass boat. Since I'll have the wheels off anyway to service the bearings and...
  11. JASinIL2006

    So I took my boat in to get fixed...

    OK, I finally got tired of my boat bogging down and backfiring under acceleration. (Diagnosed correctly on iboats as a carb issue, of course!) Got a recommendation from a friend of a boat shop he has used with success and I took in the boat. Got a call to pick it up with a nice, clean rebuillt...
  12. JASinIL2006

    Dinged up my new prop -- problem?

    Yesterday while boating on the Mississippi, I hit something submerged in about 3 feet of water. It felt pretty substantial and hard (rock/concrete rather than wood) although my charts show no wing dams or submerged wrecks in the area. Fortunately, I was only at idle speed when we struck it...
  13. JASinIL2006

    Backfires on acceleration

    My boat has a problem when we accelerate hard, like when trying to pull a skier. When I hit the throttle, about 50% of the time the boat chugs and backfires, and then catches and accelerates as you would expect. The other half of the time, it accelerates pretty strong (although I suspect I could...
  14. JASinIL2006

    Sealant for aluminum?

    Hi all, I've used 3M 5200 and 4200 on my fiberglass boat, but I need to install a below-waterline fitting on an aluminum rowboat. The applicationslist for 5200 and 4200 both fail to mention aluminum, so I'm assuming aluminum boats require some other type of sealant... what do you all use to seal...
  15. JASinIL2006

    New prop for tubing/skiing?

    I'm considering getting a new prop, partly to have a spare on board, but mostly to get better performance for pulling skiers and tubes with the boat in my signature. I'd like to get better holeshot and get up on plane more quickly. Current prop is a Merc #832834A45P23, which is I believe is a...
  16. JASinIL2006

    Transom problems with Larson 186 SEI I/O Bowrider

    Re: Transom problems with Larson 186 SEI I/O Bowrider And now, by request of a fellow Larson owner, some pics of the rear bench seat hinges... This is the hinge on the starboard half of the bench seat, with the seat lifted up: Hinges, from above. Hope this helps! Jim
  17. JASinIL2006

    Where to buy a new rear step ladder for a 1996 Larson 174 sei

    Re: Where to buy a new rear step ladder for a 1996 Larson 174 sei You just need the ladder part? I removed the flip down ladder from my 1997 Larson 186 SEI to install a different type. Is this what your bracket looks like: If this is what you're looking for, PM and maybe we can work...
  18. JASinIL2006

    dixie hustler "deck job" (turned full rebuild)

    Re: dixie hustler "deck job" (turned full rebuild) How was it covered before? Did it have any play? Before restoration, my tank was covered by a single sheet of 1/2" plywood, screwed into the fiberglass stringers and bulkheads. The only support was two 2x4s layed flat spanning the stringers...
  19. JASinIL2006

    Do you have firsthand knowledge of an I/O trim failing while trailering?

    Hi all, I've been reading all the perennial questions about using a transom saver/defloperizer, and it got me to thinking: how many of us actually have FIRSTHAND knowledge of an I/O outdrive tilt/trim failing catastrophically while being trailered? As often as this sort of failure is mentioned...
  20. JASinIL2006

    1985 Seaswirl Tempo 17 floor replacement turning into something bigger.

    Re: 1985 Seaswirl Tempo 17 floor replacement turning into something bigger. I forget who posted this originally, but I found it useful and I think it will help you.
Top