Search results

  1. G

    Bravo 1 oil leak

    Sorry, i had a trigger finger and had to modify. It is leaking out of the water intake.
  2. G

    Bravo 1 oil leak

    Folks i need some help figuring out an oil leak on a bravo 1 drive that was recently replaced. Only the lower was replaced due to no thrust washer placed by the previous owner and it ate away at the housing. After getting a hold of a used bravo 1 lower housing i changed the o ring in the water...
  3. G

    Electric fuel pump wiring issue

    Perfect, i will add an extra wire from pump pos to outside terminal on the starter to reduce exesive cranking and pump operation during cranking. Thanks all
  4. G

    Electric fuel pump wiring issue

    Rick, When the job for the wire reinstallation was going to take place the electrician removed them and now i have to start from scratch. I checked the outer terminal and there is nothing connected there. All i have on the starter is the battery pos and the yellow/red inner terminal wire. I came...
  5. G

    Electric fuel pump wiring issue

    Im sure it has been asked 1001 times so i will ask 1002 due to some confusion and conflicting info regarding fuel pump wiring. I have 1993 Sea Ray 24ft Overnighter 454ci bravo 1 and it came when bought with a 12v fuel pump installed. Now the wiring was a rats nest and i had to have someone sort...
  6. G

    Electric fuel pump issues

    Yep the raw water pump has a spot on top for the fuel pump
  7. G

    Electric fuel pump issues

    Here is what the relay and connections look like, to be honest this is a mess but then again it works fine after a little cranking. The starter does have a connection which the purple wire should connect to but the purple wire only reaches the ignition coil. Here is how the relay is currently...
  8. G

    Electric fuel pump issues

    Apologies i must have submitted the wrong serial #, the correct one is F006526. Also there is currently a relay controlling the oil pressure switch and the pump. What would be the proper connection to start the pump while cranking untill it builds up pressure?
  9. G

    Electric fuel pump issues

    Thanks Chris, i will look now to see where i am at with the pump wiring.
  10. G

    Electric fuel pump issues

    When i bought it it had the electric conversion which was working fine and still does after 4 or 5 cranks. Attached is the pic.
  11. G

    Electric fuel pump issues

    Folks question regarding electric fuel pump not working when cranking. 1993 Sea Ray 7.4 bravo i have to crank the engine about five time before i hear the pump starting. I replaced the relay with a waterproof one due to some rust on the connections thinking it might solve the issue but no luck...
  12. G

    No start with key

    Thanks mike i checked and the switch is jamming up just ordered a new one.
  13. G

    No start with key

    Yes, i have followed the wire and it seems nice and solid. I have not checked the neutral safety switch. How can i test it? Boat used to start fine and one day ...no more.
  14. G

    No start with key

    Evening everybody, i need some help figuring out a no start issue that has been afflicting me for some time. 1993 Sea Ray 454 bravo 1 won't crank or start with key switch. Gauges activate when moving the key to the start position but it will not turn over. I checked voltage and is above 12.9, i...
  15. G

    Mystery hole in Bravo 1 gimbal

    Yes the gimbal currently on the boat the pitot tubes comes out of the top. I will be closing off the hole. The only thing that i was able to find are brass and stainless 304 plugs. I read that 304 is not very saltwater friendly and neither is brass. Bronze is the way to go but all available are...
  16. G

    Mystery hole in Bravo 1 gimbal

    The boat itself is a 1993 Sea Ray but all numbers to the sterndrive and gimbal have faded away.
  17. G

    Mystery hole in Bravo 1 gimbal

    This is the only thing it has i believe it reads D419977
  18. G

    Mystery hole in Bravo 1 gimbal

    Evening folks I recently bought a used Bravo 1 gimbal because the one on the boat i purchased is far too gone in regards to corrosion. I prepped and painted the new to me gimbal upon assembly i noticed a hole with some threads that my old gimbal does not have. Can anyone shine some light as to...
  19. G

    Bravo 1 gimbal to transom seal

    Perfect, thanks alldodge
  20. G

    Bravo 1 gimbal to transom seal

    Evening folks, question on how to attach the gimbal to transom seal or gasket and get it to stick to my gimbal housing for installation and proper sealing.
Top