Search results

  1. T

    1972 25hp evinrude water over flow issue

    That could very well be the cause. Always use a new head gasket. Once they are compressed they don’t alway seal properly again.
  2. T

    1972 25hp evinrude water over flow issue

    That’s the water cooled model. 😂 Wet vac it out as it’s running and try to locate the leak. Look around the water jacket and the head. Best
  3. T

    What do these knobs do?

    This is true but with that nut only catching a couple threads I would agree it’s in the sketchy category 😂
  4. T

    Have you ever seen this?

    Well I guess it’s confirmed ✅
  5. T

    Have you ever seen this?

    I’m still leaning towards intermittent spark and that’s what I would be looking for to either rule out or confirm but that’s just me. Running in gear in a barrel will not give you any useful results as your going to get cavitation. The carb sucking in exhaust gases doesn’t help either which is...
  6. T

    Evinrude 30 hp compression question

    I would try another gauge just to be sure. Most auto parts will loan them out. And as you now know it would make no difference with the lower removed.
  7. T

    Random

    My son only has one arm. He used to dress up for Halloween wearing a bloody shirt and carrying a surf board with a big bite taken out of it.
  8. T

    Have you ever seen this?

    Nice job
  9. T

    1994 112 johnson special, blown cylinder? What now?

    That looks pretty deep. As said it’s best to pull the head and get a real good look at this before doing anything.
  10. T

    200 HP 4 stroke susuki

    It’s to new for me to know anything about it but I have heard about these flushing ports. I would be more comfortable with flushing from the lower. I rarely use muffs I have a big trash can with a ball valve mounted in the bottom to easily drain it. I can run as long as I want with no worries...
  11. T

    Johnson 4HP questions

    No I didn’t but I’ll take a peek.
  12. T

    Johnson 4HP questions

    Correct. It has a displacement hull or could even be considered semi displacement at best. They are intended to carry more weight and be a bit more stable going to and from land and your big boat. That type of hull has very little lift so getting it on a place is not easy.
  13. T

    Johnson 4HP questions

    That boat was never meant to plane
  14. T

    1979 40hp lower unit stuck

    What a way go! Maybe it’s just me but I would have some concerns about all the heat that went into that shaft. I hope everything works out for you. Best wishes.
  15. T

    Have you ever seen this?

    Maybe the previous owner had the flywheel off and didn’t torque it down or lost the key and made a new one form something laying around. Or maybe it just happened as it does happen. Best
  16. T

    Went electric

    Not sure if your model has it but I run mine on ECO mode. The mower will speed up as needed depending on the load. Save some battery life that way
  17. T

    Went electric

    Crazy looking concept. For me it just doesn’t work. Much like the Italian designs of boats it’s just not for me.
  18. T

    1972 evinrude 25hp sparkplugs

    It always hurts just a little when a 72 is considered old😂 It does sound like possibly a weak spark event. You’re in good hands with Racer and you will get results. Best
  19. T

    Question for you all

    I found that I was ignoring 18 people. I’m glad is was an easy fix I just needed help getting their. Thx again
  20. T

    2000 25hp 3cylinder Johnson getting hot.

    Running on muffs is not ideal IMO for testing. In the water or a barrel would be better. If this happened while you were trolling any chance you had a lot of weed in the water that day? May have been a restricted inlet screen.
Top