Search results

  1. T

    Please help, no spark and so lost

    Agreed with taking a break. Sometimes you just need to walk away for bit then light bulbs comes on and you realized what you have over looked. Best of luck.
  2. T

    Cmc trim bracket with a 40 hp tiller

    I have no personal experience with this but I have seen the screw clamps used on the cmc unit as they were intended along with bolts added to the lower holes in the transom bracket.
  3. T

    1971 Evinrude fisherman, not pumping water

    Have to be ask if your water level was well above the impeller?
  4. T

    1997 evinrude 40 hp tiller tilt assist

    I have heard that the 35hp rated unit will handle a 40hp 2 stroke but I would research that if interested. It’s a few $$$ less.
  5. T

    1997 evinrude 40 hp tiller tilt assist

    CMC trim and tilt units
  6. T

    How do you test a lower unit for leaks.

    I use a brake bleeder/ vacuum gauge and check with both pressure and vacuum. It is possible for a seal to leak in one direction and not the other. Im happy with 10 psi. And I agreed with Racer on the using a compressor. It only take a split second to blow the seal.
  7. T

    What glue secures the charge coil to the lamination assembly?

    You may find shims holding it in place and you may need very little or even no glue.
  8. T

    Rings for 4006E

    Agreed Anything with a gauge on it from harbor freight is suspect in my eyes. I admit I have a few HB tools but wouldn’t trust anything that needs to be accurate to be accurate.
  9. T

    ID plate corroded on Evinrude: how to find manufacture year?

    Post the photos and you will get the answers you need
  10. T

    Asking Open AI How to Change Impeller on 5.5Hp Johnson

    I started smiling at step 1
  11. T

    20 to 25 hp

    I my eyes more fuel without more air just means you burn more fuel.
  12. T

    What to do here...

    If you have the time and materials and enjoy doing it may as well save the $$ for something else.
  13. T

    Rings for 4006E

    I would start with trying another gauge to confirm those numbers. Any idea when the last time was ran?
  14. T

    Johnson 55 crank threads

    Glad it worked out for ya
  15. T

    Johnson 55 crank threads

    If it were me I would clean them up with a small triangle file. Work slow and carefully. Patients Pays.
  16. T

    Johnson 55 flywheel nut differences

    I can’t say for sure but my guess is you will need the extra height of the original to get the recoils components on and still catch enough threads on the crank. Just a thought.
  17. T

    Just Cut out the Kill Switch?

    Using it can save your life and the life of others. Not having one can cost you a hefty fine in some states.
  18. T

    Just Cut out the Kill Switch?

    Just curious why you would want to remove a life saving device?
  19. T

    E-tec 40 hp

    That looks like a lot a fun!
  20. T

    Starboard cylinders overheating, but no thermostat installed

    Agreed on checking with another gauge to confirm these numbers. Do you plan on pulling the heads to check the diverters. I’m sure you will find even more crud there as well. Best
Top