Search results

  1. dingbat

    1990 Evinrude 150hp v6

    OEM Carb kit 0439076
  2. dingbat

    prop recommendations for Trophy walk around 25 foot

    What rpm and speed are you currently running? I’m running a 15 x 15 on a 22’ boat with 225 hp at 5800. Cant imagine running a 17 or 19” prop on a 25’ boat with only 225 HP
  3. dingbat

    Bunk Boards or Guide Poles?

    Guides or poles depends on the trailer configuration. I have a #6000 rated “drive on” bunk trailer. A pair of 3” dia. x 60”, sch. 40 PVC poles line up the boat with the trailer, while keeping the transom centered. The target bunks upfront capture and hold the bow centered to the winch post...
  4. dingbat

    Towing Boston Whaler 130 with Honda CRV

    Mrs. Dingbat was driving a 1200cc 74 Civic hatchback when we met. Struggled with bicycle rack. Couldn’t imagine pulling a trailer with it…..lol Pulling a boat and a horse trailer. Both trailers weight about the same with a single horse in the trailer. Because of the frontal surface area, the...
  5. dingbat

    Towing Boston Whaler 130 with Honda CRV

    OK.......so do I go by GM's recommendation or the recommendation of the manufacturer of my boat trailer? Per (Loadrite) manual I. PROPER TOW BALL HEIGHT Tow ball centerline height should be set between 18” to 21” from the ground for level towing IV. TONGUE WEIGHT All trailers 2,000 lbs. and...
  6. dingbat

    Bayliner Trophy Bilge pump question

    If you read the small print and footnotes on any bilge pump, you'll find that the advertised flow rates are best case scenarios. By the time you figure in actual head, outlet hose size, smooth or corrugated hose, actual supply voltage at pump, etc. you lose up to 30% of rated capacity. So now...
  7. dingbat

    Bayliner Trophy Bilge pump question

    Page 31 is the detail you’re looking for pump and float. Circuit schematic in the back https://www.searay.com/content/dam/bayliner/technical/documents/past-owners-manuals/Trophy-OB-.pdf
  8. dingbat

    excessive unburnt oil on prop exhaust

    First start of the year? Did you drain the carbs the end of last season? Fuel left in carbs evaporates leaving a carb bowl full of oil
  9. dingbat

    1968 20hp Johnson leaking unburnt fuel into water

    Same with my 200 HP.....that's why I troll up wind if possible. Low compression Sticky/failed thermostats Dirty, leaking carb Carb float(s) out of adjustment or sticking Fuel mix over oiled
  10. dingbat

    1968 20hp Johnson leaking unburnt fuel into water

    Perfectly normal..... why 2 strokes are banned in a number of jurisdictions
  11. dingbat

    Battery switch not starting on 1, starting fine on 2 and All

    "Charged" means nothing more the battery is at "capacity" based on current condition. A fully "charged", compromised battery is only worth the core charge There is always a risk which is why I run two batteries and have a Tow Boat policy with a 75 mile offshore service area ;)
  12. dingbat

    Bayliner Trophy Bilge pump question

    According to your Operator's manual both components are OEM Page 31 and 32
  13. dingbat

    Bayliner Trophy Bilge pump question

  14. dingbat

    What torque for my prop?

    Because “other sites” are not liable for damage or injury resulting from an improperly installed prop. According to your manual it’s 25 ft/lbs. https://tohatsu.com/tech_info/own_man_pdfs/Toh_40B2_50B2_75C2_90C2_115A2_003-11120-2AG2.pdf
  15. dingbat

    Hybrid Vehicles

    Mr. Mayor would have a fit if he knew every smoke detector they mandated for home installation contained Am 241 (radioactive material, 7500 year half life)…...wonder how many are floating around in landfills? Don’t confuse isotopes with x-ray devices. Licensed and handed very differently by the...
  16. dingbat

    Fuel question(s)

    I agree with the running issues, but seasonal toys shouldn’t need annual carb work. Don't know what people do to their engines that require carbs to be rebuilt so often. I have more equipment (toys) than most. I’ve not rebuilt a carb in years. I start running stabilizer in everything a couple...
  17. dingbat

    Towing Boston Whaler 130 with Honda CRV

    Recommended tongue weight for a boat trailer is 7-10% Use a bathroom scale to measure. Move the boat forward or backwards on the trailer to obtain the proper tongue weight.
  18. dingbat

    Battery switch not starting on 1, starting fine on 2 and All

    Swap batteries to see if the problem moves to stays with battery #1. If it moves with the battery, #1 battery is compromised. If it stays, you have a wiring problem
  19. dingbat

    Minn Kota Ulterra issues

    Have the battery load tested.
  20. dingbat

    1996 Evinrude Vindicator 200hp--engine keeps quitting on start-up

    Several reasons Soldering is a skill. It requires training in the techniques and processes few outside the industry possess. As such, soldering is expense and problematic in the field even for skilled technicians. Crimps are easier to install consistently. Solder is permitted but cannot be...
Top