Search results

  1. dingbat

    Speedo Tube

    Congrats on your advanced navigation skills and knowledge of pitot speed calculations, though your current compensation calculation is a bit weak….lol
  2. dingbat

    sheet metal screw length

    You don't "screw" anything on a boat. Vibration over time will loosen and cause the connection to fail. Every thing should be thru-bolted with generously sized washer to spread the load over a larger surface area
  3. dingbat

    Recommend a good semi-permanent rtv

    One size doesn't fit all...... I would not install any "plastic intakes" parts using silicon RTV. You should use a Polyurethane sealants like 3M 4200 made specifically for the such applications. Nothing on my boat requires an RTV sealer so I'm not help there, but.....I do know that the sealant...
  4. dingbat

    leak from deck to inside boat above waterline

    Ideally you want the 4000 UV fast cure formulation
  5. dingbat

    RPM range question

    Now I see why none of this made any sense. This is much smaller boat (OAL rated) with a very different hull design than most the 24’ Walkarounds marketed in the US by its competitors. The boat is light weight with a suprising shallow deadrise and limited fuel capabilites for a boat marketed...
  6. dingbat

    Replacing Keel rollers

    4” grinder and a cut off wheel would take 30 seconds to resolve the issue
  7. dingbat

    Speedo Tube

    I’m plotting a course from Annapolis to Solomons, a distance of 30 miles. I burn 0.5 gallon per mile at cruise (30 mph) as calculated by Flo-Scan system. How long will it take me and how much fuel will I burn in the process of getting there running 30 mph pitot speed? How long and how much...
  8. dingbat

    Just curious

    Locally, participation is down if anything. Sport fishing with their 6am departure and cruising are the primary drivers of boating in the area. Big water combined with saltwater critters keeps the “sofa” boat and water sport crowd away for the most part. With all the restrictions put on...
  9. dingbat

    well....dreaded boat damage victim...need expertise answers

    Already getting the run around….. there is no such thing as exceeding “agreed value” with an agreed value policy. It pays the value noted on the policy, no exceptions… Your problem, the marina carries liability only insurance…. Run around is coming Probably not as great as you give them credit...
  10. dingbat

    Need Air Compressor Help

    They normally start throwing oil long before you have pressure issues. Be sure to check the power from source to motor. Could be a compromised wire or connector in the power circuit. A 2hp motor needs a dedicated 20 amp circuit My compressor at the barn was doing the exact same thing. Checked...
  11. dingbat

    Need Air Compressor Help

    Check the supply voltage while it’s running. Pretty typical behavior when the voltage is sagging. Works ok until you build up resistance (pressure) and the thermal overload kicks out
  12. dingbat

    To tip a housecleaning service?

    I don’t not tip for people doing their job. If the price is negotiated, I assume the price is all inclusive have included their “tip” in the price. If you go above and beyond the scope of the contract for me personally, that’s different. The only people I’m religious about tipping are waiters...
  13. dingbat

    well....dreaded boat damage victim...need expertise answers

    Went down this path 3 years ago. No legal difference between "notification" and "claim"
  14. dingbat

    well....dreaded boat damage victim...need expertise answers

    Must have a "liability only" policy. A "comprehensive" policy, would cover any and all damages in the contract Your best bet is to make a claim through your insurance Company. Let them fight the battle with the marina
  15. dingbat

    Chainsaw cutting lube in a pinch

    Never heard of greasing a bar or drive sprocket until now. Must be a husqvarna thing. Bought my Stihl 028 in Spring of 1990. With two wood burning fireplaces, 30 acres of storm damage and over a 1 mile of four board horse fence to maintain, that saw has been though the ringer and back over the...
  16. dingbat

    Need Help

    So did mine until a closer inspection with a hose and water Overtime and lots of pounding, the screws holding the liner to the hull came loose. Water was getting behind the rub rail and thru the openings in the joint. Removed the rub rail and removed the screws one section at a time. Filled...
  17. dingbat

    Chainsaw cutting lube in a pinch

    Hard to believing someone that owns a chain saw doesn’t keep bar oil around. A kin to owning a emergency generator but don’t own a gas can to fill it…lol
  18. dingbat

    RPM range question

    What boat are you running? Without knowing the exact boat, I’m guessing you’re about 100 hp short, if not more, for a 25’ walkaround. My 22’ is rated for 280hp, hung with a 225hp. My one buddies 24’ is rated at 350 hp, hung with 275 HP. Another friend has twin 175HP on his 25’WA I’m running a...
  19. dingbat

    Winterize carb

    Anything that starts with “I heard” is…..$&@%#£€ My suggestion…..get a new mechanic
  20. dingbat

    Winterize carb

    Methanol? Are you sure it’s not ethanol? EO or E10 will gum up over time if left untreated. I throw a bottle a Stabil in the tank before the last outing of the season. Starts right up in the Spring
Top