Search results

  1. alldodge

    Restoring 1988 19’ bayliner capri

    Welcome Not seeing enough of the boat (pics to close up) to provide thoughts of wear to cut. Some have cut the top just in front of the stern and removed that part. Can glass in back in later The seats should fold out and make a bed. Forward seat slides forward and Stern slide aft. As they...
  2. alldodge

    Time for a new battery charger

    Would like to see a pic, but I'll guess you may be looking at a Isolator and not a Bat charger Wanting a 2-bank, look into Guest or Noco
  3. alldodge

    No ignition spark or fuel at the injectors into the throttle body when cranking. Please help. 4.3 ltr Mercruiser EFI

    Check your wiring coming from the MPR (Main power relay) which is item 15 in pic. The pic shows a V8 but yours will be the same. The MPR also supply's power to the distributor
  4. alldodge

    Best all around hunting knife?

    Have carried Buck most my life. Still have the one used while in the Coast Guard (110 folding hunter). Largest problem with Buck is it doesn't hold the edge due to stainless. Current carry is Buck 284 Bantam and a folding Box cutter
  5. alldodge

    What does this marking mean on this new to me outdrive?

    I wouldn't worry about trying to count teeth. The only way to get full ratio is the rear top cap must also be removed, then remove prop shafts to finish the count. Make the prop shaft and drive shaft. Rotate drive shaft 10 times and count prop shaft turns. Then divide by 10
  6. alldodge

    1976 Montego 16- The "Free" Puppy

    Incorrect design makes boating even more fun o_O
  7. alldodge

    No ignition spark or fuel at the injectors into the throttle body when cranking. Please help. 4.3 ltr Mercruiser EFI

    Welcome Thanks for the motor serial number So the motor only cranks when the slave is jumped, and not when key is turned to start? When key ON there is no power to the ECM fuse? Turn key ON and see if you get 12V on each side of the fuel injectors
  8. alldodge

    Happy Birthday WIMUSKY!!!

    Happy BD
  9. alldodge

    Props?

    Welcome Moving you to prop area due to the question For us to help, need to know what is your current max WOT RPM? What speed are you seeing now?
  10. alldodge

    Houston….. We’ve had a problem…..

    Looks to be running real rich With zero compression might be a bent valve
  11. alldodge

    1997 7.4 mercruiser mpi blue water inboard

    All Merc twins use opposite rotating props and like VP it's easy to change. Most Merc's used Hurth/Velvet drives and it's simple to change the pump to have it rotate in different directions in FWD
  12. alldodge

    1997 7.4 mercruiser mpi blue water inboard

    Kenny, it's a 1997, they should both be LH rotation
  13. alldodge

    1997 7.4 mercruiser mpi blue water inboard

    Welcome I would do a rebuild of what you have. Look real close at the motor, it probably is a 7.4 mpi, but might be a 454 Mag mpi. If it's the Mag then it has 385hp with 502 heads
  14. alldodge

    50hp EFI diaphragm fuel pump pressure

    VST on Mercruiser is 4 to 7 low side. Just needs to be enough to keep the tank full, similar to carb bowl
  15. alldodge

    50hp EFI diaphragm fuel pump pressure

    Unable to say with 100% accuracy but finding it should be close to 42 psi
  16. alldodge

    Wiring help!

    Welcome Not sure you need a main breaker for house loads, you have a breaker/fuse panel which will protect them. Does not hurt anything if it's there Wiring looks good. The E-drive manual has a breaker between Bats 2 and 3 Main breaker should be 40amp. Size of wires is determined by how...
  17. alldodge

    It followed me home honey, can I keep it.... PLEASE.. PLEASE

    Good find, fist thing is rebuild the the drive cylinders
  18. alldodge

    Cummins Exchange offer with Atmus

    Have had Cummins stock for many years and it's done ok. Cummins now wants to shed it's 80sum% of Atmus stock. My thought is just hold what I have and do nothing. What do others think?
  19. alldodge

    Tires…

    Don't see any problem with same side or opposite
  20. alldodge

    ignition switch

    Not real familiar with Suzuki but with everything working but just won't crank, I would think those 2 brown wires are for neutral safety. Could probably connect them together for test, but lets test first Use a voltmeter and measure each wire for 12V when key is turned to start. If one goes...
Top