Search results

  1. R

    Prop, or Engine Issue?

    The factory buzzer was in the control box and plenty loud.
  2. R

    1996 Johnson 50 Not starting

    You may have discovered your issue.----Getting parts from a good dealer is always the best.----Some online sellers will sell you just about anything !!!
  3. R

    Evinrude Timing Tool

    These timing pointers are nothing but a " dummy " flywheel.------You can use your flywheel to do the exact same job.----Just takes a little longer.
  4. R

    25 HP 4 stroke vs 40 HP 2 stroke???

    About 20 lbs in my opinion.
  5. R

    25 HP 4 stroke vs 40 HP 2 stroke???

    About 20 lbs more.-----And prop rated power.
  6. R

    How to find the best Doctor

    Many medical types are interested in the money they can make.-----Some know that insurance pays for everything.------Kaching , Kaching is the key word
  7. R

    Prop, or Engine Issue?

    Really-----Every big JOHNSON since about 1962 had a temperature alarm !!
  8. R

    need a new prop ?

    Sounds like motor is mounted too high.-----Dount that a 13" prop works for your set-up.
  9. R

    1996 Johnson 50 Not starting

    Do your new plug wires have a metal core ?
  10. R

    Why is finding information on boats so difficult?

    You go to a hydraulic cylinder place.----Put old parts on the counter.----Say---" can you help with this "------Or find a place like-----ABLE O-RING----And see a million different o-rings / seals.
  11. R

    Prop, or Engine Issue?

    Post the actual compression test values.----Should be around 140 PSI.
  12. R

    Older Boats

    Some older boats might be simpler to rebuild then some of the new stuff.
  13. R

    Did I get a bad regulator?

    My book says 0 .55 ohm +/- .05 ohm
  14. R

    Did I get a bad regulator?

    I think you have a bad stator.
  15. R

    Did I get a bad regulator?

    Did you take any readings on the stator ?
  16. R

    1990 50 hp Johnson reed valves

    When you push the key in ( motor running ) the electric primer VALVE opens.-----Fuel is then injected onto the intake air stream.-----This fuel bypasses the metering circuits in the carburetors.-----To me this indicates an issue with the carburetors.----Checked flywheel key ?-----Water pump...
  17. R

    1990 50 hp Johnson reed valves

    If it starts and runs for a few seconds it is not a reed problem.----------What happens when you operate the manual fuel pump ?-----What happens if you push the key in when it falters ?-----How did this motor run for you last season ?
  18. R

    Buy a 5hp Mariner with a blown head gasket?

    I would make a dummy exhaust cover to use as a drill guide.------Drilling a steel bolt in an aluminum housing can be tricky without a drill guide.
  19. R

    Buy a 5hp Mariner with a blown head gasket?

    ??----Find the parts at a Mercury dealer.-----Find the parts at a Yamaha dealer.---Boats.net ---online has good prices.-------Your choice.
  20. R

    2 Cylinder Johnson 40hp Old Trim/Tilt

    Read before you bring out the hammers.-----Both cylinders trim at the bottom.-----Only 1 cylinder tilts I believe.-----The 2 cylinders are NOT identical.
Top