Search results

  1. Scott Danforth

    Question about the right propeller for my boat

    What is the WOT RPM you are currently able to get the motor up to running flat out.
  2. Scott Danforth

    2013 legend 20' xcaliber

    depends on the bracket you use to mount it.
  3. Scott Danforth

    Seastar rotary NFB helm

    yes, gap is normal. if they butted up, they would rub
  4. Scott Danforth

    Engine replacement help…

    no, a 1990 V6 motor intake wont fit a V8, and while it says vortec on the valve covers, its not a true vortec headded motor as those came out in 1996
  5. Scott Danforth

    Engine replacement help…

    You can use a short block and heads with brass core plugs and marine gaskets and circulation pump
  6. Scott Danforth

    Engine replacement help…

    look for a late 90's bayliner with a good 5.7/alpha 1 Gen 2 and a rotten hull. grab the whole motor/drive
  7. Scott Danforth

    I need the part number for oil pressure sensor

    Have you gone here and looked? https://www.volvopentastore.com/
  8. Scott Danforth

    Engine replacement help…

    what we have here.......... is a failure to winterize....... or a thermal-declination material breach
  9. Scott Danforth

    leaking riveted starcraft ('82 MR180)

    Im going to go with the thru-hulls use some good tyvek tape. tape over the thru-hulls. then drop in the water
  10. Scott Danforth

    Aluminum DuoProps?

    I do not endorse anything but the D series or the F series. the new X series is a compromise, just like the J series I personally buy older props with spun hubs and have them re-hubbed vs buying new.... mainly because there are 3 types of boaters down here. those that have hit something...
  11. Scott Danforth

    305 boat cam

    4-relief pistons are just stock carp to allow Johny assembly line worker to assemble them on a Monday with a hangover If you are going thru a rebuild. Look at LCQ style pistons and focus on quench Like the kb179
  12. Scott Danforth

    Aluminum DuoProps?

    A means to remove cash from your wallet?
  13. Scott Danforth

    Boat paint tips

    you need an etching primer for aluminum. or at least alodine to etch it.
  14. Scott Danforth

    Worn through gelcoat

    you are going to need more than just gel coat by your description of exposed core.
  15. Scott Danforth

    projects other than boats

    Got a bumper made up. Will be front, however may need a V-bumper then I will move to the rear
  16. Scott Danforth

    data tag location

    4-relief pistons are stock carp. Nothing special. It allows Johny assembly line worker to be able to assemble the motor on a Monday with a hangover Chev used the Vortec name long before the vortec heads. The Gen 2 SBC (LT1) used the same combustion chamber as the vortec heads, however the...
  17. Scott Danforth

    data tag location

    For the motor, you are dealing with the 1992-1995 vintage of motor. Balance shafts, non vortec
  18. Scott Danforth

    Worn through gelcoat

    That's literally in the middle of nowhere 1 hour from anywhere I say drive down to St Pete and hit up FGCI
  19. Scott Danforth

    data tag location

    The sticker was intended to last thru the 1 year warranty period.
  20. Scott Danforth

    Engine replacement help…

    Most likely a bent con rod from hydro lock
Top