Search results

  1. Scott Danforth

    hi there :)

    Nah.....W.O.P.R.
  2. Scott Danforth

    305 boat cam

    What pistons? What. Heads? As @Scott06 mentioned, vortec heads are highly recommended. For the cost of aftermarket roller cam, you can buy a low hour 5.7 liter vortec motor with a roller cam
  3. Scott Danforth

    Alpha 1 Gen 2 drive ratio?

    3.0 gets a 2:1 drive 4.3 gets a 1.84:1 5.0 gets a 1.62:1 5.7 gets a 1.47:1 you dont have enough motor with a 3.0 to spin a 1.62:1 drive
  4. Scott Danforth

    RPM range question

    Lugging a motor kills it. Always best to get the motor to the top half of the RPM window. To me, you're 500 - 600 RPM below where the motor should be. However verify your tach first
  5. Scott Danforth

    Large diameter, high output stator

    Reached out twice to Windings and a few other manufacturers. Taking no answer as an answer..... Think this thought is officially dead
  6. Scott Danforth

    Weight distribution for 14ft modified vhull

    cant help you with your project as there are too many unknowns, however welcome aboard
  7. Scott Danforth

    Need Help

    first, welcome aboard. is this a new to you boat or a boat you have had for a while that has a new problem? your 1996 wellcraft is built when there is still wood in the stringers. so my guess is there is a bit of rot happening under the cockpit sole. can you tel if the cabin has a sump, or...
  8. Scott Danforth

    2001 Maxum 2400 sc for 13k v 1995 FourWinns 238 vista

    price of upholstery for a 24' boat will be a few grand if you do it yourself. it will be a bit more to have a professional do it.
  9. Scott Danforth

    Replacing transom on aluminum Jon boat

    NO see your local radiator shop, they can weld that up for about $50
  10. Scott Danforth

    2007 Alumacraft Classic 165cs Bilge Pump Question

    its probably done by the factory like that. bilge pumps on I/O boats are under the oil pan and require the motor to be removed to service.
  11. Scott Danforth

    Alpha won’t trim underway

    is the pump plumbed and wired correctly? green (grass) - drive should go down blue (sky) - drive should go up. the pump is set for 2900 psi up, about 900 psi down. if its plumbed/wired backwards, it wont have enough power to overcome the thrust of the prop. if you raise the drive a bit and...
  12. Scott Danforth

    1995 SX140 TAKING ON WATER

    The plastic plumbing lasts about 15 years. Your boat is almost 30 Start at one end of the plumbing, check every fitting and clamp
  13. Scott Danforth

    projects other than boats

    Quick view. do not have the adjustable shelves in it yet. Have a new planer coming this week. Inspiration comes from this. Wife saw it and said, that is how she wants the whole closet.
  14. Scott Danforth

    first bass boat (Evinrude outboard)

    factory service manuals for your outboard. https://outboardbooks.com/ the owners manual on the boat is a 4-page brochure pointing to the pointy end and calling it a bow, pointing to the propeller end and calling it a stern. all other bass tracker information can be obtained from Tracker...
  15. Scott Danforth

    Looking for replacement heat exchanger

    looking at the pic, its an aftermarket unit. the factory volvo units are painted / powdercoated.
  16. Scott Danforth

    Looking for replacement heat exchanger

    most likely your volvo heat exchanger is either a Moda unit or a Champ unit.
  17. Scott Danforth

    projects other than boats

    Making the shelving and cabinets
  18. Scott Danforth

    projects other than boats

    car project is put on hold a bit. building the wife a new closet, then building the shed later this spring. getting 200 board feet of hickory amd 6 panels of 1/4" hickory plywood to make a custom closet for the wife. regarding the fiat, the stator idea is all but dead as there is no response...
  19. Scott Danforth

    2007 Alumacraft Classic 165cs Bilge Pump Question

    follow the discharge to the pump. the discharge will be the thru-hull just below the rubrail
  20. Scott Danforth

    Stumbling at Cruising Speed - OMC 5.8L

    It's never the coil It's nearly always not using the dwell meter
Top