Search results

  1. dingbat

    97 johnson 200 Throttle body help

    Even so, how many carbs kits for a 25 yro outboard do they sell in a season? Depends on whether or not the other parts in the kit are compromised as well. Worst case, you take a hit in the wallet in buying the kit. I would order from a big, on-line dealer/parts houses or Evinrude direct to...
  2. dingbat

    97 johnson 200 Throttle body help

    Those gaskets are part of the rebuild kit. Doubt they sell many individual gaskets. Worst than time is UV and ozone exposure although the ones on the picture look dry rotted. Hard to believe they’ve not been in service for a good long time based on the deterioration of the surface and the...
  3. dingbat

    97 johnson 200 Throttle body help

    Black gaskets…probably OEM 1997 or older. Gaskets in the OEM kit now (past 10 years) come with brown, viton gaskets.
  4. dingbat

    Nylon vs Polyester Rope for Mooring a Houseboat to Shore

    My everyday dock lines are polyester and the anchor line is nylon. The stretch in nylon minimizes the stress on anchor and hull. Keep 150’ of “natural” line onboard for misc duties.
  5. dingbat

    1986 hydra sport 22' walk around

    ….
  6. dingbat

    Corrosion/coating on props question

    Where are you at? Anywhere you can fill a salt shaker off the transom at the end of the day (Solomon’s south) is a bit more than “light brackish, not really salty” If it came off with muriatic it’s either organic as in dried slime or oxidation in the form of chromium oxide. Check the condition...
  7. dingbat

    Help needed to bring back the Shine!

    Imagine the look of horror on the owner’s face when he looks out and sees “Harry Legs” heading out to detail his yacht with a sanding block and a jar of Vaseline….lol Unless the gel is completely trashed, I’d suggest using any of the marine/gel specific compounds and a 7”- variable speed...
  8. dingbat

    Doohickey

    I guess it depends on where your from. Grandma always called things doohickeys. Pittsburgh area
  9. dingbat

    Cutty cabin leaks on 96 trophy, any ideas?

    Where is it leaking?
  10. dingbat

    Adding a Temp gauge

    Not sure what a temp gauge buys you in an open loop cooling system. What are you missing? Open loop systems are all about flow (pressure). Water pump pushes water through the system. The thermostats regulate the flow to maintain the desired temperature. To over heat, you either have failing...
  11. dingbat

    Prop Advice

    Yes and no..... unless your propping for a specific application, you prop for max. RPM with your average load. At 5200 rpm, your within the rated RPM range, but your not at optimal RPM for that motor. You want to be closer to 5800 rpm which would require dropping 2" in pitch (200 rpm x 2" =...
  12. dingbat

    Replacing trailer axle... what are the considerations?

    No need to get out....Uni-servo free backing brakes are just that, trailer is "free to back" w/o intervention.
  13. dingbat

    Replacing trailer axle... what are the considerations?

    Match coupler with brake type. Drums need a different coupler than disk brakes A used coupler is just asking for problems.
  14. dingbat

    Prop Advice

    "Planing speed" is a function of the hull design. It takes X speed for the hull to generate enough lift to plane. You hear claims of lower planing speeds from props but I have yet see any documentary evidence of it. If your running @5200, your leaving 400-500 RPM on the table. I'm running a...
  15. dingbat

    Replacing trailer axle... what are the considerations?

    Only if you go with electric brakes. Surge requires nothing. Comes down to what's cheaper....a surge coupler or a electric brake controller A 7 pin is required to support electric brakes. A flat- 4 wire connector will support surge drum brakes with free backing pads.
  16. dingbat

    Replacing trailer axle... what are the considerations?

    Depends on the load. Most States require brakes on at least one axle if trailer weight exceeds #3,000. Should check local requirements
  17. dingbat

    Replacing trailer axle... what are the considerations?

    Hot dip is a process through which an extrusion (axle) is dipped in a pot of molten zinc and let to cool and dry. The superior corrosion resistance comes from having the cross section completely coated, inside and out, leaving no bare metal exposed to rust. Over time the zinc coating gets...
  18. dingbat

    Replacing trailer axle... what are the considerations?

    That axle is hot dipped. Can tell by the pitting Your looking for “rust” stains coming through the coating. Can look pretty bad cosmetically yet still be sound., Grab a hammer and tap/bang the bottom of the axle across the width. Particularly in the center. Should respond with a solid ring to...
  19. dingbat

    ProLine 2950 Walk 1995

    Don't see a sling causing issues with the hull. Can see a sling, without a spreader to distribute the weight, trying to collape the support poles inwards under the weight
  20. dingbat

    No power to gauges/motor. Trim and Bilge have power

    Start here....
Top