Search results

  1. Scott Danforth

    Ignition timing specs volvo penta aq125a

    No, it should idle at 700 RPM in neutral and about 650 in gear
  2. Scott Danforth

    Ignition timing specs volvo penta aq125a

    In gear at idle (about 600rpm) as per the manual
  3. Scott Danforth

    Looking at a boat with a 1995 Evinrude 120 V4, anything I should know?

    The motor can be replaced. Most importantly......How is the transom/stringers on the 29 year old boat
  4. Scott Danforth

    Ignition timing specs volvo penta aq125a

    If you can't idle down, agree with Kenny. Service the carb
  5. Scott Danforth

    Eska 7.5 14038A 1977 no spark

    Find out which lawnmower flywheel you can swap out on the motor and run the magneto ignition from a lawnmower
  6. Scott Danforth

    2002 Chaparral 286 SSI

    Actually on a boat, you want simple. Fred Flintstone fix with a wooden club simple......A carb not only is cheaper than EFI, it's easier to repair and parts are available (unlike many 20 year old TBI or EFI motors). And no, EFI does not have better economy or power A +1 on not changing the prop
  7. Scott Danforth

    Another prop slipping thread

    I'm glad my drive has a drive plate vs a coupler.....lol A good flashlight will tell you the health of the coupler. If you see rubber bits and it looks like the center sleeve is being pushed out a sphincter....the coupler needs replacement
  8. Scott Danforth

    2002 Chaparral 286 SSI

    in 2002 you can have a carbureted motor or TBI injection on the 5.0 you will want the manuals for your motor, induction system, and drive https://www.volvopenta.com/en-us/service-and-support/your-engine/manuals-and-handbooks/ a 20 year old boat with only 180 hours means that the boat sat for...
  9. Scott Danforth

    Evinrude Paint

    agreed, unless the old paint is within a year old, the new paint will look new. get enough paint to paint the whole surface.
  10. Scott Danforth

    Dog gps trackers

    check the hunting group forums. something like the duck guys or coon hunters. I would not trust many of the reviews on Amazon. most are looking for dogs escaping their home (urban environments), not out wandering the woods. here is a list from PC magazine...
  11. Scott Danforth

    Another prop slipping thread

    your fine with the power assuming you dont mash the throttle for a holeshot and most importantly, run a rev limiter to kill the engine should you launch from one wave to the next. that instant loading of the drive as you come onto the second wave will grenade the drive. coupler should be good...
  12. Scott Danforth

    What are these?

    blinker fluid reservoir cap.
  13. Scott Danforth

    Evinrude Paint

    agree with matching in person I have painted many motors, including johny-rudes. just never painted them the stock colors. my favorite is still House of Kolor NE508 "Chartreuse / Nitro Neon Yellow" color https://www.kolorhouse.com/hoc-ne508-q01.html data sheet...
  14. Scott Danforth

    Glastron vs FourWinns with the consolidated plant

    usually construction methods are commonized when they migrate brands under one roof. wouldnt make sense to vacuum infuse one mold, then put all the equipment away to drag out other equipment to chopper gun the next boat. what you will find..... brand A gets stainless deck hardware ($1000)...
  15. Scott Danforth

    Another prop slipping thread

    if the coupler is bad it is usually from not checking alignment every year you do pull the drive every year to check alignment and u-joints per the manual, correct? common things that lead to the drive being out of alignment: rear mount bushings fail and motor sags transom is rotten and motor...
  16. Scott Danforth

    Charging Voltage, '97 Suburban

    the clamp-on cable terminals are junk. only way to clean a cable that is corroded between the strands is to replace it. get a set of properly made cables with properly terminated ends. I usually make my own using marine battery cables (tinned copper)
  17. Scott Danforth

    Mercruiser 4.3LH backfiring & weird timing

    agree on compression numbers generally if the timing appears to have moved that much, usually the outer ring of the damper is no longer bonded. use a cylinder stop and degree wheel to indicate TDC. if the damper ring has shifted, get a new damper.
  18. Scott Danforth

    re-center steering wheel penta SX-a Dino wheel

    Did you pull the tiller arm off the pivot!
  19. Scott Danforth

    Glastron vs FourWinns with the consolidated plant

    Same reason a Cadillac Escalade is $20k more than a Chevy suburban
  20. Scott Danforth

    VP 280 no reverse

    looking at the pic, link #3 isnt connected. it looks like its there in the corrosion crud, however not connected.
Top