Search results

  1. alldodge

    diesel fuel filters

    Can you clarify what you mean by floating?
  2. alldodge

    Bravo 1 oil leak

    Okey Dokey, where is it leaking?
  3. alldodge

    Internal Coolant Flush and Winterizing VP 4.3 GXI-BF

    Always glad to see you comment, your the expert with vp. We all make mistakes and with your current record your hardly ever wrong. All good from my view
  4. alldodge

    Second Happiest Day . . .

    I'm sure there can be a good reason but would have to hear it, otherwise there is other things I've been looking around myself, just to see if I can find something that will work better. The one thing I won't do (as of this date) is get anything with CATs
  5. alldodge

    Internal Coolant Flush and Winterizing VP 4.3 GXI-BF

    What Lou said look for 7/16 hex head pipe plug down low close to the middle of the block
  6. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    Get some 3/8 x 16 all thread and cut so they are a inch or so longer then needed. Remove the bolts on the ends of the manifold. Screw in the all thread, then remove the rest of the bolts from the man. Slide the man off the all thread. This way you don't have to hold the man
  7. alldodge

    Exhaust Shutters - To Flap or Not?

    No The larger ones are one size fits all 4cyl to BB 8cyl
  8. alldodge

    Exhaust Shutters - To Flap or Not?

    That looks like inboard exhaust parts. You have a V drive or I/O?
  9. alldodge

    No spark

    NO expert but maybe my comment will bring one around. I'm thinking the switch box
  10. alldodge

    Volvo Penta model 2003-T: what size diesel supply and return line tank nipples to order?

    The threads are NPT (national pipe thread) Meaning, 1/4 NPT means it has a 1/4 inch inside hole Being only 44HP I would expect a 1/4 Normal is 3/8 for larger motors, and that said, without measuring
  11. alldodge

    Mercruiser 3.0 TKS problem at cold air temperatures

    With motor warmed up, spray some WD40 at the base of the carb and intake to see if the idle changes any. Can also use a small propane torch and let the gas only (don't light) and move it around the gasket area
  12. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    Hey @Bondo @Scott Danforth a little help please
  13. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    Verify compression gauge Do a leak down test Right now your compression is way to high. If your cylinders are actually 150 to 160 except 5 then that would mean 5 is 116. If compression is accurate then need to find out why their to high. This is caused by liquid or carbon build up. If it...
  14. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    5 is not firing very well and most likely do to low compression 6 the thread being oily might just be because the valve cover is leaking slightly. Don't think its the valve seal because there isn't much of any carbon build up If the choke was not opening all the way "ever" then this can cause...
  15. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    The leak down test will tell if its rings or valves for the low compression. You can do it just to 5 but figured doing the test might as well get readings on the rest. The plug doesn't look bad but all show signs of rich
  16. alldodge

    Internal Coolant Flush and Winterizing VP 4.3 GXI-BF

    Remove the block drains, there is one on each side. Re-install plugs and fill with 50/50 or higher concentration. Don't know of a detailed write up other then the owners manual maybe
  17. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    Then your flooding or other liquid in the cylinders. Compression should not be that high unless motor was rebuilt with high compression parts. If you have a air compressor, check with tank pressure In any case, still leak down
  18. alldodge

    Compression test results 4.3L V6 2005 what do You think?

    Ya need a new gauge Do a leak down test to see if its the valve or rings on 5
  19. alldodge

    battery

    If the 8 gauge is the battery cable then ok, and assume its a small motor
  20. alldodge

    Exhaust Shutters - To Flap or Not?

    Flaps don't hurt, but if you have room put a 3 inch riser in and leave the flaps out
View older results
Top