Search results

  1. Scott Danforth

    Bellow replacement job

    as long as they spin good and are not rough feeling, you are good
  2. Scott Danforth

    OMC sterndrive not moving in gear.

    you need a big C-clip pliers for the two C-clips. I used a 18" Blue-Point with a ratchet lock sterndrive.info has good videos on the OMG stringer and they have a good assortment of parts along with a rebuild service.
  3. Scott Danforth

    454 Low Vacuum + Flutter?

    timing affects vacuum at idle
  4. Scott Danforth

    Adding 100+hp. Would you re-prop ?

    Add the HX before the motor hits the water (any water). the debris that the leg picks up, sits in the bottom of the block until you put an HX on it. then it plugs up the HX on the side you cant clean
  5. Scott Danforth

    Humid/Dirty Boat

    My bud is in Speedwell, a bunch of floating houses near there.
  6. Scott Danforth

    Tin Rig Tow Vehicle

    Here is a list of SUVs with 5000# towing or more Make/Model Engine Max. Towing Cap. Starting Price* Acura MDX 3.5L V6 5,000 lbs. (SH-AWD) $51,272 (SH-AWD) Audi Q7 (55 TFSI) 3.0L Turbo V6 7,700 lbs. $63,945 (Premium 55 TFSI) Audi SQ7 4.0L Twin-Turbo V8 7,700 lbs. $89,840 (Premium Plus)...
  7. Scott Danforth

    Quit My Job . . .

    Im going to claim the rights to the BLN "Boat Launch Network" used to have a bunch of videos on youtube of the local boat launch in Door County Wisconsin while sitting at my buds dock 15 years ago on Memorial Day weekend. you cant make it up.
  8. Scott Danforth

    Impeller- Red paint- remove before removing screws??

    yes, volvo hoses down the engine and the Johnson pump. just use your pocket knife to flake off the paint if you are worried about it. they are either Metric (M4 or M5) or #10 screws. they are not very tight (they dont need to be)
  9. Scott Danforth

    94 180 Horizon question

    you may get lucky, however most of the fall-out of the OMC brands when OMC went bust was loss of documentation. Same goes for Chris Craft and other brands owned by OMC in the 90's however Four Winns in its current configuration started in 2014, which is most likely why their documentation only...
  10. Scott Danforth

    94 180 Horizon question

    four winns was bought and sold 3 times during the period of when your boat was made and today.
  11. Scott Danforth

    OMC sterndrive not moving in gear.

    Vertical drive shaft would be a thing to check
  12. Scott Danforth

    Leaf Springs

    With a torch and welder you out can change anything you want However getting the springs you have is easy. They are simply one of the many styles of springs available
  13. Scott Danforth

    OMC sterndrive not moving in gear.

    That looks like freeze damage
  14. Scott Danforth

    Bellow replacement job

    only thing slicker is a tube of KY jelly...
  15. Scott Danforth

    Boat fell off lift and smashed some rocks.. What are your thoughts on this damage ?

    that transom doesnt look good. looks like the rocks ground away the fiberglass exposing a rotting core. if you have insurance, find a different boat. Especially if its salt water.
  16. Scott Danforth

    Is Hull fixable

    Im in the boat industry. I know exactly what boats cost. I would still not touch the boat based on the pictures.
  17. Scott Danforth

    Humid/Dirty Boat

    Covering a board keeps moisture in. Bottom pain helps with growth. Have fun on Norris lake. A good buddy built his dream home there
  18. Scott Danforth

    Tin Rig Tow Vehicle

    Check towing capacity. Most vehicles require trailer brakes for weights above 1000 or 2000# unless you get into a truck or full sized SUV
  19. Scott Danforth

    1989 Volvo Penta AQ271c cooling system

    If you are having cooling issues, check the fitting on the drive
  20. Scott Danforth

    1989 Volvo Penta AQ271c cooling system

    Power steering cooler, and it's copper
Top