Search results

  1. alldodge

    Gas seeping from fill cap

    It doesn't burn much at all doing winterization. Depends on how warm it gets. Then if it sits with the bow up a bit higher then when hooked to the truck, this also can add to the issue
  2. alldodge

    Gas seeping from fill cap

    Don't fill it up. My Rinker use to do the same thing and only happens when it gets warm if I filled it up. Gas expanded do to getting warmer then when it was filled.
  3. alldodge

    Winterize boat

    Using it every few weeks I wouldn't do much if anything
  4. alldodge

    Manual #17 Question on Versions

    See how many pages there is. Mine has 967 pages and one manual
  5. alldodge

    any active members near Rockville MD

    Local Uhaul open trailer rental, 14hr drive, hotel room, 14 hr drive I'm doing similar Sunday going to Texas with Friend to pick up a Kubota CTL
  6. alldodge

    any active members near Rockville MD

    Don't know if there correct but found front and rear https://www.gmpartsstore.com/oem-parts/gm-pontiac-solstice-bumper-cover-89025064-89025064?origin=pla&gclid=Cj0KCQiAlZH_BRCgARIsAAZHSBkSHpQhSIAFsL_s1AuUfbbD98h0NElHt021IWLBHA7U2fjfI3AYzhAaAtu2EALw_wcB...
  7. alldodge

    Prop selection 3.0 cobra -140 Hp

    There will be more then 100 rpm difference between a 3 and 5 blade prop. Someone has defective equipment, is trimming up to high, doesn't know what their doing, or is lying
  8. alldodge

    Prop selection 3.0 cobra -140 Hp

    Need to check your tach
  9. alldodge

    Merc 7.4l 454 Gen 4 to 5 interchangeable?

    Can look here as to where the numbers are and how to look them up https://www.mortec.com/location.htm
  10. alldodge

    Volvo DP leak.....HELP

    This gives me concern that the boot was not installed correctly and may be leaking at the clamp. Either that or the seal between drive and bell housing is the issue. The crud about its the drive and they do not respond makes me wonder about the shop Don't see this being the issue because if...
  11. alldodge

    Column Replacement

    Edger, don't own one anymore, just weed wacker. This is my short term rental that we rent out, so 2 places to take care of
  12. alldodge

    Volvo Penta 5.7 GS with closed cooling system

    No need to run motor for the thermostat to open with closed cool. Drain the heat exchanger and anything else on the raw water side, then use AF Now for changing the oil, might want to run it a bit to suck the oil out
  13. alldodge

    Column Replacement

    Yes a bit of grass. Wanted to seal but time got away, maybe next year
  14. alldodge

    Column Replacement

    All done, just need things to dry so can get the lawn back in shape
  15. alldodge

    Prop selection 3.0 cobra -140 Hp

    This isn't right, the both are 17P, a 3 blade and a 5 blade. The 5 blade would be at least like a 19 pitch (and could be a tad higher), but the RPMs stayed the same? More blades gives more lift but also takes more HP to turn. I would continue with the 17P 3 blade
  16. alldodge

    Mercruiser 6.2L MPI overheating

    I just turned the port
  17. alldodge

    the old ones as they call us do dumb things

    Think the Red with fuse would go to the rectifier for charging te battery They all appear to connect to the starter relay This is from the manual link. It shows a couple different colors
  18. alldodge

    Mercruiser 6.2L MPI overheating

    I did the new style on mine, but I could get to mine from the port side https://forums.iboats.com/threads/bravo-itis-fix.680176/
  19. alldodge

    the old ones as they call us do dumb things

    Have not found the 35 but did find the 30 and 40hp wiring. http://boatinfo.no/lib/mercury/manuals/30-40_2cyl.html#/108
  20. alldodge

    Merc 7.4l 454 Gen 4 to 5 interchangeable?

    Going for another block, maybe think about the 502
Top