Search results

  1. Scott Danforth

    1988 Rogue 2420

    Thanks. since fuel and water are on the starboard side, I made the assumption that the shore power should go there. however thought I would ask.
  2. Scott Danforth

    Harmonic Balancer bolt thread/size for removal.

    yes, imperial. should be 5/16-18 or 3/8-16
  3. Scott Danforth

    1988 Rogue 2420

    what was the failure mode. on the same topic, is your shore power receptacle on the port side or starboard?
  4. Scott Danforth

    2021 Splash of the Year Voting

    Holiday belly bump
  5. Scott Danforth

    Inboard Engine Cover is Really Heavy

    Engine cover should be fiberglass
  6. Scott Danforth

    Mercruiser 3.0 turns over but won't start

    I would check for spark, check compression, and find why you have a fuel smell. Check the tell-tale hose from the fuel pump. If it has fuel in it, your fuel pump failed and is dumping raw fuel into the carb
  7. Scott Danforth

    Mercruiser 3.0 turns over but won't start

    Do you have spark? What are the compression numbers?
  8. Scott Danforth

    1988 Rogue 2420

    Received a 3-bank battery charger and a 12 volt water pump for the boat. Will be adding a flush port, shore power, and a transom shower in the next few weeks
  9. Scott Danforth

    Mercruiser 3.7 (470) wont turn all the way

    If your in FL...... Swung by for a beer
  10. Scott Danforth

    Merry Christmas!

    Merry Christmas
  11. Scott Danforth

    Mercruiser 3.7 (470) wont turn all the way

    And if you pull the rockers, pushrods, or lifters. Label them. They must go back in the exact same location.
  12. Scott Danforth

    Mercruiser 3.7 (470) wont turn all the way

    The 3.7 was an OK concept, however Mercruiser fell down with the execution. We can all agree on that Half a ford 460 with a gm flywheel and custom crank and cam, great midrange motor a step above the 2.5/3.0, and a step below the 5.0 The floating bores of the open deck block should have been...
  13. Scott Danforth

    Mercruiser 3.7 (470) wont turn all the way

    An overheat causes the headgasket to leak into the cylinder walls because an iron head and open-deck aluminum block is not the smartest design Only being able to turn 90 degrees would have me pulling the motor and putting it on a stand regardless of the motor
  14. Scott Danforth

    Restoring Celebrity 240 cuddy

    custom build HX into one of the cooling hoses.
  15. Scott Danforth

    Restoring Celebrity 240 cuddy

    no idea for your boat
  16. Scott Danforth

    daily music fix

    always like to hear Christmas Wrapping from the waitresses (circa 1981) this time of year. (no official video exists)
  17. Scott Danforth

    Mercruiser 3.7 (470) wont turn all the way

    stop turning the crank from the crank bolt. always use the starter or flywheel teeth. since you removed the drive, you have a motor issue. if the head gasket went on the motor, you will have rust in the cylinder bores.
  18. Scott Danforth

    Restoring Celebrity 240 cuddy

    shurflow pump ($70 on amazon), poly tank (from one of my sister companies or $50 on ebay), and a transom shower. the HX will be custom made by me.
  19. Scott Danforth

    Starcraft Factory Paint type?

    powder coat was not used in the 70's and 80's on boats. at least for the Mirrocraft it was a wet-spray process by two blokes smoking cigarettes prior to the conveyor taking it into an oven.
  20. Scott Danforth

    I need some photo scanning software

    my old 1993 XP pro machine had such software as part of the bundle with the scanner, the old Kodak software that was on the machine would do similar photo manipulation. however havent seen anything in years that is inexpensive and works. Im following along as I have about 2000 photographs of...
Top