Search results

  1. alldodge

    Boat Wiring Diagram?

    There is next to none which have wiring diagrams, most use the motor manufacture as the basis for the engine wiring. The boat it self uses the basics which would be something like this Now if you want the motor and gauge wiring, we would need to know which motor
  2. alldodge

    Trolling motor wiring

    Should be wired like this
  3. alldodge

    Stern Drive Oil Leak Surprise - Happy 4th

    This should work
  4. alldodge

    Stern Drive Oil Leak Surprise - Happy 4th

    Try this method
  5. alldodge

    87 mercruiser 3.0 clicks but won't crank

    Here is the wiring for the start circuit. The slave solenoid has to large wires on it, Red purple and Yellow/Red. If you cross those two terminals its the same as talking a screw driver and crossing between the main starter post and the small left post. If your unable to get anything by...
  6. alldodge

    Trouble Code 0336 with new motor

    Found a source of the GI wiring but it shows the EST distributor and not the HVS. With that I don't see how it can be correct. It shows pin J2-32 with a Purple/White wire which feeds the coil and the injectors. Also has 2 relays, one main power and the other is fuel pump.
  7. alldodge

    No HIgh pressure schrader valve Vp GSI ??

    Not a VP guy but I have never seen a shrader valve on a motor with TBI, only MPI. You would need to use a fitting like the Merc 91-806901
  8. alldodge

    Is it a Rochester or a Mercarb?

    I'm finding you should have the Merc 2 barrel carb. The Webar and Rochester are both 4 barrels http://www.mercruiserparts.com/5-0l-2-bbl-gm-305-v-8-1988-1995-0b7 The carb on page 292 uses a filter stone and carb is a Rochester BC, Also note the fuel bowl is different then the 2GC The carb...
  9. alldodge

    Mercruiser power steering control valve issue

    Howdy I would remove the cable the reinstall noting the slots are vertical (view d) and the nut is tightened down
  10. alldodge

    lower unit gear repair set

    Yes the ratio varies Here is the chart You need 20-24 teeth gears in the upper, keep in mind if you wind up with a 1.94 instead of 1.98 it wouldn't be that much of a difference
  11. alldodge

    5.0 surge and stop, fuel or spark or what?

    When it starts to stumble look down the throat of the carb and see if its flooding (probably isn't just checking). If not flooding I would suggest putting a fuel pressure gauge connected at the carb. Need to make up a Tee fitting with connectors and fuel line, or use a adapter fitting and...
  12. alldodge

    Trouble Code 0336 with new motor

    I'm thinking you may have just found your problem. Won't get to excited yet, but a man overboard safety switch should kill the motor, and the only way to do that is remove power to the coil (in most cases). I'm a Merc guy and not VP, but this is pretty simple stuff to do, so thinking they...
  13. alldodge

    USCG Documentation SCAM Site

    Not sure if this has been posted here by just FYI There is a site that has been scamming folks out of money looming like the USCG. They make it look legit and they will renew your documentation for 75 when it actually cost 29. I think its also being helped out by google with dead links. If you...
  14. alldodge

    1998 Mercruiser 5.7 EFI fuel leak

    It will be a pain. The bracket that holds the entire cool fuel is bolted to the motor mount. There are two nuts one on each side. Remove the hoses. The fuel lines need to be removed from the pump, and the cooler. The pump end is threaded, the cooler end has a socket head screw pin (item 9) which...
  15. alldodge

    Signs of a failing Oil Pressure Switch

    I think you have either a key switch that is not making a positive connection, a 10 pin connector with connection issues and /or in conjunction with a oil pressure switch that is intermittently making connection. The oil pressure switch passes 12V and the ground is always there.
  16. alldodge

    Gimbal housing install

    The fixture shows the holes
  17. alldodge

    Idle and acceleration issue

    Agree, It's a carb issue and check the accelerator pump adjustment, bore and check balls
  18. alldodge

    Looking for suggestions for repair around garboard drain.

    Howdy Your transom has gotten soft from the water. At this point you need to replace the wood and glass behind it. Also need to and some hull repair
  19. alldodge

    Gimbal housing install

    The pattern
  20. alldodge

    Changed 2012 Volvo 5.0 to 5.7 will not idle

    Contacted Bob myself to get the low down so if anyone else passes by the thread they can read. He says the EGC's are made by E-controls and he knows of no one which works on them. The market is small so until it increases folks won't get into them as yet. Guess the answer to your issue is you...
Top