Search results

  1. Scott Danforth

    1988 Rogue 2420

    re-plumbed the oil filter and added the oil pressure switch for the buzzer.... then realized I forgot the oil temp sending unit (will add that tonight) it was dark by a bit after 5, so I started wiring the new dash each terminal is crimped, soldered, and sealed with epoxy heat shrink
  2. Scott Danforth

    1988 Rogue 2420

    a bit cold this weekend.... been in the 50's had a fire yesterday evening...... that with the adult beverages....... and I was out early..... and yes, thats a 50# bulldog-puggle on my head spent the better part of yesterday and today chasing the factory wiring. a few circuits were tapped...
  3. Scott Danforth

    1988 Rogue 2420

    cockpit drains used to simply run to the bilge. while it made it OK, it meant that a fair amount of leave debris would end up in the bilge. also during a few outings, we hit some torrential rains . so since the cockpit drains are about 8" above the water line, I decided to use in-line...
  4. Scott Danforth

    1988 Rogue 2420

    a bit of progress this weekend. with the motor in place, I could not reach the thru-hull location for the bilge discharge..... reaching with a pliers could not get there...... Now not only can I get my arm in there to connect the bilge discharge, I can also re-locate the blowers on the port...
  5. Scott Danforth

    Forum Format

    Whiskey Tango Foxtrot......
  6. Scott Danforth

    Garmin Chart plotters

    time to take a small pile of cash from the wallet and turn into a display and transducer looking at Garmin, however, havent looked on the website for a few weeks, and all the units I was looking at are now being replaced with new anyone keep tabs on that is going on I want side view and down...
  7. Scott Danforth

    1988 Rogue 2420

    well...... its dirty...... however it is now mine......
  8. Scott Danforth

    Random

    stolen from facetube
  9. Scott Danforth

    Forum Format

    Hey iboats_tim Kiter007 , something is broken..... same on both google chrome and firefox
  10. Scott Danforth

    1988 Rogue 2420

    I hope so, here is a pic from the interweb with the factory Bimini. my gunwales are a bit higher so there should be plenty of room....... not to mention the wife and I are both in the 50% for height....... (maybe the 65th percentile on weight.....or more......) I will be taking the current...
  11. Scott Danforth

    1988 Rogue 2420

    this one is from a 2016 yamaha AR210
  12. Scott Danforth

    1988 Rogue 2420

    I sometimes run a few miles off shore, so the added height will be needed. plus the arch makes a nice base for a modified bimini that may actually stay on the boat with the higher speeds with the new motor....
  13. Scott Danforth

    1988 Rogue 2420

    here is the unit at Marine Surplus
  14. Scott Danforth

    anyone hear from woodonglass lately

    His last post was oct 19th, anyone hear from our favorite Okie?
  15. Scott Danforth

    Forum Format

    The current forum format has a major flaw. while posts in the 39 major forums may get spoted as they may show up in the recent activity. there now is absolutely no visibility to manufacturer forums or the hundreds of other forums not in the top lists. Have to ask.....WTH happened to the...
  16. Scott Danforth

    Random

    Saw this and had to share
  17. Scott Danforth

    1988 Rogue 2420

    after polishing, one must stand on their head to install mufflers, elbows, and hoses and yes.... my feet are black from polishing compound Just need to get a 45 degree barbed elbow for 1" hose and 6 hose clamps you can see the sweat and goo from my arm as I leaned on the H-pipe. Now I can...
  18. Scott Danforth

    1988 Rogue 2420

    Had to work Saturday for a military project..... so, didnt get to work on the boat until today. had the mufflers modified during the week, and the first elbows shortened. My polishing guy at work is busy polishing the bow chafe plate and the anchor door for the Lexus LY 65 yacht..... so he...
  19. Scott Danforth

    Generic Boat Wiring information - Updated Verified

    in an attempt to restore information lost due to broken links and photobucket. Here is a thread that will attempt to gather all pertinent generic wiring information starting with the SAE wiring colors as published by the ABYC American Boat and Yacht Council Standards COLOR ITEM...
  20. Scott Danforth

    Not sure what is more cool.....

    is it the boat...... is it the workmanship..... is it the kid? found this via a social media post..... guy builds his son a working aluminum I/O boat for achris ....thats "local bloke builds petrol powered boat" https://www.youtube.com/watch?v=yEuMKlLQwk0...
Top