Search results

  1. flashback

    excessive corrosion?

    Can't see it. Stray shore current does eat them.
  2. flashback

    Old I/Os = Money Pits?

    You are right, the only thing I found hard was the availability of a cherry picker tall enough, I had to take the wheels off the trailer.
  3. flashback

    How To Determine If Motor Is 305 Or 350

    .,I see much better access for maintenance on several items that usually get nothing.that reman has some advantages.
  4. flashback

    Deadman Switch?

    I have never used the telephone cord tied to my wrist, if I were in a race boat I would. The safety on the anchor is in my opinion a necessity.
  5. flashback

    How To Determine If Motor Is 305 Or 350

    Casting numbers or measure the bore is the only I know..
  6. flashback

    Old I/Os = Money Pits?

    Yep a good buff and detail and the boat can look like new but the rest of it could be finished..
  7. flashback

    How To Determine If Motor Is 305 Or 350

    Yea and it doesn't look like there's anything in it?
  8. flashback

    Old I/Os = Money Pits?

    You pretty much nailed it, I/OS need alot of tinkering.
  9. flashback

    3.7 Power Steering unit

    Years ago I had one that had accumulated water in it and it rusted out on the bottom of the tank..
  10. flashback

    Dual Battery ... Wiring fail or I just don't understand?

    I did exactly that several years ago and then had to scratch my head for a bit!
  11. flashback

    Transom patch

    In the interest of the OP I don't want to de-rail the thread. I can agree with sealed air space with inspection covers.
  12. flashback

    Transom patch

    I see the point I just don't see the logic. If I tear up a boat that is holed that bad I want my life jacket. I suppose the kind of water your boating in makes a difference. I honestly don't know, none of the sailboats I've chartered had foam in them.
  13. flashback

    Transom patch

    I've read countless threads in the resto forum where folks have dug out several hundred lbs of wet foam. Why put it back in?
  14. flashback

    Transom patch

    Or don't put any foam back in it. At least I wouldn't. It promotes moisture retention.
  15. flashback

    Fuel Tank - Replace?

    It's getting old and plastic does break down over time unfortunately not fast enough so it should last a while. I guess it comes down to how long you need the boat and if you have the resources to replace..
  16. flashback

    Gimbal Bearing Science

    I'm going to guess that in some cases a bad bearing could seize and possibly spin in the carrier. The one in the pic I posted shows possible signs of that. IDK.
  17. flashback

    Admiral's New shower

  18. flashback

    Transom patch

    Yep keep digging, if anything structural has rot it needs to be replaced in it's entirety not patched and most of a boat is structural.. good luck with your project
  19. flashback

    Engine dies going into reverse

    No, the outdrive needs to be removed to replace it. That said you might be able to adjust the cable enough to work. Look in the sticky threads for adjustment of shift cable.
  20. flashback

    Engine dies going into reverse

    You might just need an adjustment to get you by for a while. I'm not savvy on how to post links. Achris has a good video posted here.
Top