Search results

  1. C

    Bilge pump wiring backwards?

    This particular pump does not pull at low water levels I have discovered.I put a small portable pump at a low level and pumped the bilge water to the pump in question and it primed and pumped very well. I would not recommend an Attwood automatic pump if you want to pump water at low levels. It...
  2. C

    Older Boats

    An older fiberglass would be a much better overall choice and there are some pretty cool looking ones you can restore much easier than a wood boat.Charlie
  3. C

    Bilge pump wiring backwards?

    NOPE!! Wired correctly and when wires are reversed.....nuttin.
  4. C

    Bilge pump wiring backwards?

    Yep ,Im thinking that is what I did.Will take a look, thanks
  5. C

    Bilge pump wiring backwards?

    I should know this. Bilge pump failed and I grabbed what I had in garage just to empty shower water from bilge.Grabbed an attwood automatic .Did a quick connect till I get a. New pump.It won't prime.Will a pump run in reverse if I crossed pos and neg wires?
  6. C

    Bent skeg on outboard

    As the Beatles said.....Let it be. Charlie
  7. C

    Impeller Question with Rabbit Ears On

    I believe 145-160 is where you want to be. Charlie
  8. C

    Where to put fuel and battery (weight distribution on RIB)

    Weight distribution on my Zodiac is opposite side of where I sit while navigating.Weight forward will help got you on plane faster but give you a lot more drag when not planned off.Charlie
  9. C

    MPH not showing on Gage OX66 motor

    Didn't do much but flushed the motor thru the flush hose and now the mph is showing at 5-6 mph regardless of my speed.. at least its registering something????? Charlie
  10. C

    Vinyl protectant/conditioner

    DONT listen to that knucklehead!!! Charlie
  11. C

    MPH not showing on Gage OX66 motor

    OK, thanks guys!! I'm looking...Charlie
  12. C

    MPH not showing on Gage OX66 motor

    Im thinking powerhead since the pickup tube hangs from the leg when the lower unit is dropped and reconnected when lower is installed.
  13. C

    MPH not showing on Gage OX66 motor

    Thanks!!! Not exactly sure where the tube leaves the motor??
  14. C

    MPH not showing on Gage OX66 motor

    2000 200hp Saltwater series with digital Yamaha gages.Everything else seem working. mph has worked forever.Where to start looking.I did a water pump service this spring and attached the tube properly and has been working for approx 1 month this year.Any suggestions??? This is the style of gage...
  15. C

    Mystery Outdrive Gear Oil Leak

    QUOTE ". On Labor Day weekend after pulling tubers for a few hours on the way back to the dock I heard a grinding sound, the motor stalled and when I tried to start back up again the sound was still there, so I paddled back to the dock. Since it was the end of boating season, I pulled the boat...
  16. C

    Trim pump not working in down position

    https://defender.com/en_us/martyr-limited-clearance-sacrificial-shaft-donut-collar-anode?utm_id=150171837047&utm_campaign=19735474073&utm_source=google&utm_medium=paid&utm_content=649561344444&gad_source=1&gclid=Cj0KCQjw0ruyBhDuARIsANSZ3wqWooS8zp8qnTbSdIL5c3uQYJWY6u6ZDweHYauyiKtHYLTp_ChpR7saAlziE...
  17. C

    Trim pump not working in down position

    Hey Lou,I have never seen corrosion that bad, not even close on 30+ years of mercruiser.I put collar zinc on my lift cylinders.you may want to...
  18. C

    Trim pump not working in down position

    Its a very good idea to raise drive all the way and grease the rams all the way and run it up and down a few times , each time spreading the grease back onto the ram.The grease will gather at the cap each time. Charlie
  19. C

    Boat Top W/Windows

    You can try looking up your boat on Greatlakes boat tops.Do a google search in case I don't have the name exactly right.They supply many gem canvas tops to manufacturers.I got my complete setup for my Grady white Adventure, top windows full enclosure.Charlie
Top