Search results

  1. zarillus

    2018 Suzuki DF300 Aux charging,batt switch, and separate House/starting batteries

    Hope you guys can help.I am a little confused as to how to re-wire my boat... Now is where i get a little lost... A little background: I repowered last year moving away from the old Mercury 225 efi that was on my 2003 Proline 25 Sport Center Console. * It currently has two batteries with...
  2. zarillus

    Ez loader trailer whats is going on with this?

    Guys- For some reason my trailer has developed a bow inwards along the two ibeam frames just past the front axle.The trailer came witht the boat and has been in use for 3-4 years with no problems.What would cause the inward deflection or bending if the ibeams.What would cause something like this?
  3. zarillus

    Adding helm seats on top of existing leaning post

    I have a 2003 Proline 23 Sport and I am trying to add seats on top of the existing leaning post setup.My idea was to remove the worn out leaning post cushion and pout seats on top.The question i have is the current leaning post has curve downward in it facing the bow.Will the seats just bolt on...
  4. zarillus

    Boat steering wandering after new Uflex system?

    Just installed a new Uflex system with new helm,lines,and cylinder however the boat wanders at wake speed all over the place.I have to continually correct it port/starboard...port/starboard...port/starboard...port/starboard.... to keep it going straight. Any ideas?
  5. zarillus

    Another Smartcraft install question...

    Do they make an adapter to go from a 10 pin can data bus (blue cable) from engine to a new level 2 merc monitor that is 14 pin? Does anyone know what i need to do to make this work? I already ran the blue cable which has 10 pins however the new mercury monitor gauge is 14 pin? Th
  6. zarillus

    Boat Panel Mystery box ?

    Does anyone know what the box might be used for? I have not followed the wires yet but curious if anyone knew? Boat is a 2003 Proline 23 Sport Center Console.
  7. zarillus

    Changing Tandem axles and hangers with Boat On using Travel Trailer Jack

    Hey guys- I was looking at a trailer jack called "travel trailer jack" and was thinking of picking up two of them to change out my axles and hangers on my tandem trailer.The trailer has a 05 23ft Pro-Line Center console on it currently.Has anyone done this? I am going to try and change...
  8. zarillus

    2005 Honda 225 Questions...

    Guys- I am looking at a Proline that has a 2005 Honda 225 with 950 hours.What can anyone tell me about these motors? What should i be checking for? Any gotchas on these?
  9. zarillus

    Boat Buying 101 Avoiding Disaster

    Guys, I am in the market for a new boat and i was wondering how i can protect myself.I have read so many horror stories i am now completely worried about throwing money into something for nothing.I have also read the post regarding what to check before buying a boat. Don't get me wrong, i...
  10. zarillus

    Lean pop and Running Rich

    I have an 89 Evinrude 110 that has a lean sneeze at idle however when i pulled the spark plug in the #1 cylinder its dry,black, and sooty? All other appear normal with just a slight amount of oil on them.I thought that would indicate i was running rich however the damn thing is sneezing at idle.
  11. zarillus

    Lean Sneeze and Running Rich

    I have an 89 Evinrude 110 that has a lean sneeze at idle however when i pulled the spark plug in the #1 cylinder its dry,black, and sooty? All other appear normal with just a slight amount of oil on them.I thought that would indicate i was running rich however the damn thing is sneezing at idle.
  12. zarillus

    Correct Orifices for Aluminum bowl Conversion 89 110 Evinrude ??????????

    Guys, Conflicting numbers and confusion regarding the correct orifices for an 89 Evinrude 110 E110TLCEM.The parts houses do not specify metal or plastic bowl. I have the aluminum bowl Anyone know what jets i need: My current guess: 67C 36 Not sure about the last one 25C? 26C? 26, 25...
  13. zarillus

    **1989 Evinrude 110Hp Running Like Crud Video inserted ..........

    Need some help, this motor has had the plugs replaced, wires, carbs rebuilt, compression checked 100 101 100 100,gast tank cleaned, filter replaced, checked for restrictions. Not sure what the heck is going on on pulled the plugs and two of them look carbon fouled the other two look oil...
  14. zarillus

    Help Identfying Correct Carb for my Rude

    Guys, I really need your help, i am trying to re-build and now identify if i have the correct carb for a new too me 89 Evinrude 110HP.The Numbers stamped on the carb body are 334329-DN. The mouth of the carb is 1 5/16 which i though these motors had a 1 3/16 opening,anyhow i just ordered...
  15. zarillus

    Fuel Tank relocation ideas to maximize space ???

    Boat 1967 Larson All-American 166 17 ft 110HP Evinrude The one pictured is almost a mirror of my boat I currently have my fuel tank mounted in the bow which is around 19 gallons. This is not optimal because sometimes the long run back to the motor requires several pumps of the primer...
  16. zarillus

    Adding a belly fuel tank to old 67 larson lapline

    Hey Y'all, Anyone add a belly fuel tank to their Larson? I need space for other things :) thanks in advance
  17. zarillus

    Need a larger Fuel tank

    Hi Everyone, I need a larger fuel tank that will fit in the bow area of my 1967 Larson all-american.I want to try and get at least a +30 gallon tank in there to take up the room i have available in the bow area.Currently i have a little 15 gallon. Any recommendations on a bow tank that would...
  18. zarillus

    Completely Frustrated Linkage problem

    1989 110HP E110TLCEM I bought a new throttle cable and installed it as per the instructions in the Top secret file however when shifting to full forward and then back to neural i cannot get it to go back to the idle stop its about 1/4 to 1/2 inch short from the idle stop.I have to manually...
  19. zarillus

    Boat Covers the Good...the Bad... the Ugly...

    I will be stroing my boat outside for the forceable future and wanted a Boat Cover that will provide protection year round from Hot Florida Sun and that will also be used for trailering the boat.I welcome all suggestions on materials,
  20. zarillus

    OMC side mount Control Question Backwards

    There are two cables coming out of the control,which is for shifting and which is for the throttle ? How do i tell what is what without taking the control apart. Anybody?? HELP
Top