Search results

  1. holgo123

    1993 Chris Craft 217 BR w/5.0 L OMC Cobra Transom Rot...

    Posted a while back on some water intrusion, hydrolocked engine... Cleared all the water out and got the engine running, but... I noticed water coming in over the exhaust, dribbling down the transom plate... I just pulled the engine today and took off the transom plate and transom mount... The...
  2. holgo123

    1993 OMC Cobra 5.0 L, Pulled Transom, Now I'm Sick...

    Posted a while back on some water intrusion, hydrolocked engine... Cleared all the water out and got the engine running, but... I noticed water coming in over the exhaust, dribbling down the transom plate... I just pulled the engine today and took off the transom plate and transom mount... The...
  3. holgo123

    1999 Evinrude E115FPLEEN 115 Hp Fuel Line ?

    What size fuel line should this engine have attached to it? It currently has a 5/16" which seems kind of tight on the fuel inlet on the motor... Wouls this be too restrictive? Also, this engine was run dry of fuel. Do I need to flush the lines because the oil was still pumping without any fuel?
  4. holgo123

    1999 Evinrude E115FPLEEN Fuel Injected FICHTS Surging...

    The continuing saga... I have been trying to help my friend get his pontoon boat back in the water... Over the winter, muskrats ate through the fuel line which we discovered when he tried to make a short run to the dock to pull the boat out of the water before winter... He ran until all the fuel...
  5. holgo123

    1999 E115FPLEEN FICHTS Spark Plug Alignment...

    I replaced the plugs on a 1999 115 hp Evinrude and the spark plug electrodes have to be aligned up to the injectors... I drew a line on the plugs to help me do this, but not all of them would align exactly facing the injectors once seated... Is the some leeway to eaither side allowable? Also, is...
  6. holgo123

    1999 Evinrude 115 Hp Fuel Starvation?

    I am helping my friend get his boat back in the water this year and have been trying to troubleshoot a couple of problems... He had some muskrats chew through the fuel line while the boat sat in the water... We replaced the line, but the boat wouldnt' start. We replaced the plugs (lined up with...
  7. holgo123

    1999 115 HPEvinrude FICHTS Kleen Outboard Starting Problem...

    I have a 1999 Evinrude 115 hp outboard that had a "kicking out" starter issue that this board helped me fix a couple of days ago... Unfortunately, I still can't get the boar started I think due to fuel starvation. This winter a muskrat chewed through the fuel line, and I replaced it... The motor...
  8. holgo123

    1993 OMC Cobra 5.0 l EFI Transom Mount Interchangability...

    Does anyone know if a 1993 OMC Cobra transom mount is interchangeable with a 1991 OMC Cobra transom mount? I looked the parts up on dougrussell.com and they have the same part number but are N/A. I am going to replace my transom mount due to some heavy corrosion and just want to make sure... The...
  9. holgo123

    Troubleshooting Transom Water Leak

    I have a 1993 OMC Cobra 5.0 L in a Chris Craft Concept 217 BR. I had some water intrusion (previous post, "Topic: 1993 OMC Cobra 5.0 L EFI Water in Oil, on top of Piston... ") I have the engine running and am now trying to troubleshoot the water leak I found directly at the bottom of the transom...
  10. holgo123

    1999 Evinrude 115 HP FICHS, Starter cutting out...

    I have a 1999 Evinrude 115 HP FICHS that the starter cuts out... It will engage and start turning the motor over , but then quits after a few seconds and not long enough for the engine to start. Any ideas?
  11. holgo123

    1993 OMC Cobra 5.0 L EFI Water in Oil, on top of Piston...

    I have a 1993 Chris Craft Concept 217 BR with a 5.0 L EFI (Ford) OMC Cobra. We were out yesterday and the temp gauge started rising right after we pulled away from the dock. I was kind of going very slow because my wife was eating something and telling me not to go too fast... I trimmed the...
View older results
Top