Search results

  1. imraan47

    shift shaft on outdrtive

    Hey. so still having problems with the shift shaft and also worried about installation of the outdrive. i just took it out to see whats going on. here is a pic of the outdrive shift shaft. i moved the shift shaft to point straight forward and as i did that i moved the prop counter clock wise...
  2. imraan47

    shift shaft washer missing?

    I have 2.5L mercruiser 120hp with alpha 1, gen 1 outdrive. last summer took the outdrive off to fix the engine coupler. previous summer the lowerunit was replaced by mechanic. as the outdrive was in the car for about a month when the coupler issue was being dealt with, i noticed that there...
  3. imraan47

    epic boat jump

    http://www.videobash.com/video_show/epic-boat-jump-4597
  4. imraan47

    gimble bearing and engine allignment

    Hey. ok so i had a busted coupler which i replaced my self. i got the coupler for 150 and its pretty new. now my gimble is seized and i got the new one. i pulled the old one out with a newly bought slide hammer. i dont know how to put the new one in and it didnt come pre-greesed. my...
  5. imraan47

    removing inboard engine

    Hey. i have tried to rent a small crane but cant find anything. i was wondering if there are any other ideas of how to get an inboard engine out. i have a 1988 2.5L mercruiser there must be some way to do this other than a forklift..maybe something homebuilt .
  6. imraan47

    help...ujoint shaft doesn't spin

    Hey .. so at the beach to anchor the boat and anchor didnt sit well and ran to the shore and the scag must have hit the bottom...i pushed the boat into deeper water then tried to start engine and go forward and noticed knocking kind of sound. i look down into the engine and notice that there is...
  7. imraan47

    would you go with a 16ft bowrider this distance?

    There is a in water boat show at port credit harbor marina next weekend. I wanted to go for the first time but by boat. I have a 16" bowrider, 120hp merc. I was wondering if its safe enough to go that distance from say Toronto islands which is basically where my boat is. Here is a map of the...
  8. imraan47

    1988 merc engine shut off when going to reverse

    Hi. I have a 1988 mercruiser alpha one gen one on a glasstream 152 tempest bowrider. since i got it dewinterized i noticed that the engine shuts off when i put in on reverse. well it idles fine from neutral to reverse but as soon as i push throtle further down the engine just shuts off. any...
  9. imraan47

    what is this? merc 1988 120hp engine

    Hey guys. I was wondering what this part is (circled in blue ) on a mercruiser 2.5L 120hp 1988 Also where are the two red wired supposed to be going? i know the thicker one is to battery but what about the other one to the left that is longer and looped around with a ziptie?
  10. imraan47

    Micron csc extra shark white

    Scored some free micron csc share white. how much will i require for a 16ft boat? also is there any prep needed to apply this?
  11. imraan47

    guages all messed up..please help fix

    Hey guys. Ok so i went to replace the dash pannel which is going great. I wanted to see how the wiring all is to re-wire the lights which i got alot of help on previous thread. Now i look at all the wire's for the guages and they are all mixed up and the guages arent even all at zero. how do...
  12. imraan47

    Help getting steering out

    Ok i opened the nut here and the damn steering doesn't come off...i tried to nudge it back to back but still nothing...is there something i am missing to take off? i was pulling pretty hard and it feels like the whole dash will smash into my arms so i was hesitant to pull more.
  13. imraan47

    canvas help

    http://i14.photobucket.com/albums/a304/imraan47/IMG_1054-2.jpg What is A for ?? how does it work? i have no clue I can't seem to figure out if i got B and C the opposite way. this view is on the portside so should i flip the rods and have B where C is??? thanks
  14. imraan47

    how to test blower?

    Hello. I was wondering if there is a way to test the blower that it is sucking out the fumes. The blower does work but there is continuous squeaky sound. I also some how doubt that the fumes are being sucked out. Perhaps i can create some sort of smoke that i can see, maybe with incense? so...
  15. imraan47

    Free online Electronics courses/reading material

    I hope this is not in violation of the site rules... EDIT: Sorry, it was against the rules. Have a look at the forum rules and guidelines at http://forums.iboats.com/forumdisplay.php?f=405
  16. imraan47

    is this gel coat gone? help to make this better

    Hey guys. Ok so i just had to get pictures so that i can get better response's to see how this can be fixed. the first 6 pictures..you can see tons of crazing and in this area which is all pretty much at the sides of the boat and some on the transom. You can see the cracks and also some of...
  17. imraan47

    exhause and ujoint bellow question

    I have a Mercruiser 4cyl. 2.5L 120HP 1988 Glasstream if you want to replace the ujoint and exhaust bellows because they have some crack, do you really have really have to remove the stern drive or the out drive? my mechanic says he has to drop everything then he can get to it thus charging the...
  18. imraan47

    152 tempest

    I have one!
  19. imraan47

    fiber glass paint work help

    Hey guys. So i have a 1988 Glasstream 152 Tempest Bowrider Eng.Mercruiser 4cyl. 2.5L 120HP. I had kept in in the water for 2 months towards the end of the summer then pulled it out in November 09 straight for outdoor storage and ofcourse winterizing it. when i got it out it was really dirty...
  20. imraan47

    where can i get this for a 1988 glasstream tempest

    Hi guys. not sure what this is called but here is a pic. mine fell off in the middle of the lake! please help find this somewhere.
Top