Search results

  1. alldodge

    Switching from Volvo TBI to Carb on a 1996 5.7 GI

    Just like the Davis one, the EST is self contained and only needs what is in the distributor to run. While Sierra is ok, the standard automotive GM is the same, nothing special
  2. alldodge

    Gemlux Friction Hinge Repair

    Just so I/we understand the issue(s). The hinges must be used a lot. In most cases a friction hinge is used only where the operation does not happen often. Something that gets used often should have something else to secure it when opened, like a gas strut, self locking latch or other To your...
  3. alldodge

    Cigarettes, shocked!

    Taxes https://assets.tobaccofreekids.org/factsheets/0222.pdf
  4. alldodge

    Alternator hookup VP Gxi-g

    Many times if the orange wire will be disconnected from ALT if it's going to a isolator, auto charge relay or Battery switch connecting different Bats. Connecting it to a Bat switch would be worst case If your installing the motor in standard fashion, re-connect the orange wire and get rid of...
  5. alldodge

    Gemlux Friction Hinge Repair

    Welcome Which ones are costing you $700
  6. alldodge

    Cigarettes, shocked!

    Quite in 1988
  7. alldodge

    Help with #1 cylinder location- 2007 df250

    Unable to confirm, just using the link and pic shown
  8. alldodge

    Help with #1 cylinder location- 2007 df250

    I'm finding at manualslib that number one is top right, this is facing motor looking Aft and seeing front of motor, so port side of boat on top Edit, this is assuming the heads face toward the bow. Never looked under the cowl of a Suz so don't know which way the motor faces...
  9. alldodge

    Draw on battery 1

    Read thru your thread For clarification you are discussing the 2006 Rinker, right? Your disconnecting the Mercathode lead which, make sure it's disconnected by measuring voltage on the module. Keeping boat on trailer you can leave the Mercathode disconnected Being a 2006 the motors should not...
  10. alldodge

    Switching from Volvo TBI to Carb on a 1996 5.7 GI

    As Scott said coil is fine Timing is done as follows the difference will be DO NOT use timing listed (2*), you will need to use most likely 8* BTDC. You also do not have a shift interrupter
  11. alldodge

    Switching from Volvo TBI to Carb on a 1996 5.7 GI

    Yes that's a EST, just use it
  12. alldodge

    Switching from Volvo TBI to Carb on a 1996 5.7 GI

    The DUI will work and several have used it Merc and VP used Delco EST
  13. alldodge

    What razor and single razor blade in it are available ? CHEAP Who sells such a simple razor and holder ?

    Sounds like what G-dad always said
  14. alldodge

    I/O (Sterndrive) Conversion to Outboards

    Hey Ted, as a Mod you could delete all these non-conversion comments and clean up the thread ;)
  15. alldodge

    496 overheating

    Could use your serial number but, your motor has a temp sender for the gauge, and a ECT (engine coolant temp) switch which tells the ECM it's hot. The ECT is item 7 in link https://www.mercruiserparts.com/bam/subassemblydetail/43086238/28188353
  16. alldodge

    Yamaha 9 .9 high thrust

    With only 12 hours I would guess it's made that way. Might stop by a dealer and ask just to make sure
  17. alldodge

    What razor and single razor blade in it are available ? CHEAP Who sells such a simple razor and holder ?

    Your old enough, you should know the answer to the question Straight razor and leather strap will last longer than anyone of us and our grand kids has been alive
  18. alldodge

    Is it my PC, cookies, IP address or...

    Use something like firefox and get no adds
  19. alldodge

    What could these brackets be for?

    Taylor made fender lock Fender
  20. alldodge

    Volvo Penta engine coupler runout … aka wobble

    It should be solid and hard, being able to move it than the coupler is toast and needs replaced, crank is fine like Scott said
Top