Search results

  1. Lou C

    99 Volvo 5.0GL

    Did you pull out the fuel pick up tube and see if there's a clogged screen on the end of it? What can happen is this: some of these pick up tubes have a screen on the end and some don't (if you look closely at mine above you can see it doesn't have the screen). If you don't pull out the pick up...
  2. Lou C

    SNOW Common Sense

    Was that a '76 Olds? We had the same car, one year older, same color! Except that ours had round headlamps instead of the rectangles. Great car loved it. 5.7 Olds & Quadrajet carb and Turbo 375 (IIRC) auto trans. We got around in snow with Firestone Town & Country studded snow tires on the...
  3. Lou C

    Electronic steering

    Also, if you're used to the bargain basement prices for keeping old style I/Os running (inexpensive GM/Chevrolet parts, Edelbrock carbs, Carter fuel pumps, etc) just look at what 4 stroke outboard parts cost. They are sky high expensive. Yes they don't need much work for the use you get from...
  4. Lou C

    SNOW Common Sense

    I think what happens is that the auger has tension against it when it's jammed by a piece of ice, then if the ice is dislodged, the auger moves and can trap fingers. This is why I like single stage machines, they never clog due to the auger moving at high speed. My next one will be an 8 HP...
  5. Lou C

    SNOW Common Sense

    Same mines been on the same roller trailer since I’ve owned it, I did add some rollers to spread the load out better but it’s been fine.
  6. Lou C

    Electronic steering

    Steigers are made not far from where I live and they’re great boats but even used are very expensive. I think a good quality outboard boat more reasonably priced is Key West…
  7. Lou C

    Electronic steering

    If you're in fresh water and trailer the boat, leave it as an I/O. Outboards are great when new and are low maintenance and better performance in some ways but very high cost when they rust through/break. If you're tired of sourcing Cobra parts you can convert what you have to either the...
  8. Lou C

    Which exhaust manifold gasket?

    pic of inside of the elbow/manifold joint
  9. Lou C

    Which exhaust manifold gasket?

    I'd say you were VERY LUCKY that those didn't leak on the inside like they did on the outside! Agreed, I'd use Fel/Pro for your manifold to engine gasket and use the Volvo OEM for the elbow to manifold and follow their instructions. With those elbows you can actually remove a fitting to look...
  10. Lou C

    SNOW Common Sense

    https://mypowermap.psegliny.com/external/default.html?_gl=1*p2wqew*_gcl_au*MjEzNjY1NjcwNC4xNzcxODQyMjEz*_ga*Nzc3NjU1MTcxLjE3NzA1NjA5MzM.*_ga_NNW1ZHSD38*czE3NzE4NTUzODgkbzIkZzAkdDE3NzE4NTUzOTQkajU0JGwwJGgw*_ga_0LV46WDXPV*czE3NzE4NTUzODgkbzIkZzAkdDE3NzE4NTUzOTQkajU0JGwwJGgw
  11. Lou C

    SNOW Common Sense

    The wind finally quit here, it was howling loud all night, not sure how much we got, but it's a lot, varies a lot due to drifting. Noticed something interesting, I looked on the PSEG Long Island outage map (we didn't lose power) to see how many people were out.... last night 15,000+ this AM...
  12. Lou C

    SNOW Common Sense

    Yes snow blowers are great, but you have to be careful with them too! Many ER visits because of people reaching inside to clear clogs. Never do that with any snowblower. Already fired mine up and ran the generator as well. Mixed up some more 2 stroke fuel for the little old Toro.... E0 fuel...
  13. Lou C

    anyone use the aftermarket p/s actuators sold on ebay and amazon? looking for feedback

    I know the Volvo OEM ones were like a grand or so, these are like 1/4th that price? I bought a couple of nice used ones for my Cobra, the one I installed in 2021 is still working well. Those are the older Bendix style units that both OMC and Merc used, you can rebuild the control valve but the...
  14. Lou C

    I/O (Sterndrive) Conversion to Outboards

    Interesting, so about the same weight as (engine alone) a Mercruiser V8, but then you have to add the transom mount/outdrive and you know how heavy Bravos are lol.
  15. Lou C

    I/O (Sterndrive) Conversion to Outboards

    Very nice Ted, 700 hp! And less weight!
  16. Lou C

    Thinking about making a trailer cover... Opinions wanted.

    Here on Long Island if something isn’t up to code you can hire a “facilitator” who makes it all good lol. One palm greases the other….
  17. Lou C

    Thinking about making a trailer cover... Opinions wanted.

    We got permits for all the major projects we did them being an in ground pool and deck…so when I sell at least that’s covered. The thing is the bank that’s going to write the mortgage will do an inspection and they don’t want to own a house (which they do till you pay off the note!) on a...
  18. Lou C

    Thinking about making a trailer cover... Opinions wanted.

    Don’t forget when you eventually sell, anything that’s not in compliance can hold up the deal…
  19. Lou C

    Thinking about making a trailer cover... Opinions wanted.

    In take your last nickel NYS, I wouldn't even consider doing that. And, depending on what happens, I may be able to exit this overpriced overrated place, in the near future....
  20. Lou C

    Thinking about making a trailer cover... Opinions wanted.

    I bought a Taylor Made custom cover for my F/W about 20 years ago and built a wood frame to support it in snowy winters. It has held up well but needs repair of a few tears so I feel it was a very good investment. I hear Taylor Made isn’t as good as it was so if I replace it I may have to go...
Top