@kwanza1 noticed in your first post you mentioned that you were unable to get into your original account. Guessing it was @Kwanza so maybe @tpenfield can assist
I don't have a wiring diagram for your exact model but do have one for GL-E which also uses the EST ignition. With the ALT not working...
In a house
Cold comes in and Tees so cold travels on to all cold faucets and the other side goes into the hot water tank. It comes out of the hot water tank and goes to other side of all faucets
The one for $369 is a 120V only and does not allow for the motor coolant to heat up water. Your...
Have tire patched with plug and inner patch combo and never have an issue
https://www.homedepot.com/p/Steelman-1-4-in-Tire-Repair-Patch-Plug-Combo-25-Box-JSG382/303437787?source=shoppingads&locale=en-US&fp=ggl
Never had that type tire, good you made it
I don't like changing a tire but in most cases the tire can be repaired so long as it's not on the side wall
Don't leave it plugged in
Most vehicles these days have a 2 position fuse the the 12V outlet. Look into your owners manual and/or fuse box. The fuse location should have 3 female pins, where it is now is full time 12V. Pull the fuse and plug it back in using the same center pin and the outside...
I would suggest contacting the manufacture of the cable and ask them how to measure and determine which cable would be best. This way if it doesn't work they have to replace
Didn't see ARO or similar, did find closed loop and both were using that at idle. Started motors twice and never got the low Bat beeps
Pulled plugs and reinstalled waiting for new to come in
My comment above is IF you have owned the boat since new
Replace lower shift cable and bellows. Replace gimbal bearing IF it doesn't feel silky smooth.
Bellows kit and shift cable is under 300
If your having it done your looking about 1000
A dock friend said they saw someone today taking pics of my boat on the lift, of the bow area. Didn't stay on dock long so don't know if they took other pics of the motors and the paint.
